UMNITZA M-tech Kit Installed
#1
Members
Thread Starter
Join Date: Mar 2011
Location: Las Vegas
Posts: 95
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2008 BMW M5
![Default](https://5series.net/forums/images/icons/icon1.gif)
UMNITZA: Finally purchased the M-tech kit for $900 shipped. It was ordered on a Tuesday and got it in 3 days on the following Friday, and it was packaged awesome! I know a lot of people on the forum have had some issues when ordering from Umnitza, but i didn't have any issues what so ever. The transaction went smooth and customer service was great.
PAINT: I got everything painted/wet sanded/polished for $1000 from a locally owned shop in Henderson, NV called "Image Makers Automotive" The color match was perfect and i couldn't be happier at the way it came out. I probably could have gotten it done a little cheaper somewhere else, but i didn't want to go cheap on the paint. I figured I'd already saved cash by purchasing a replica kit, so i decided to put some of that savings into the quality of the paint.
INSTALL: I decided to do the install myself to save about $300. With my experience working at a body shop during high school and all the DIY's available, i felt fairly comfortable doing the install. It was actually fairly simple. Out of all the pieces, obviously the side skirts were the easiest; taking about an hour to complete. There are about 8 or 9 screws underneath and the top clips in. IMO the rear bumper was the most difficult to install. It took about 3 hours, and after a few adjustments the fitment was perfect. The front bumper was actually easier than i thought. Most people who do the install themselves say the front bumper took the longest, but for me the was the rear bumper. Most of my time on the front bumper was taken by transferring over the fog lights, kidney grilles and PDC sensors, as well as the mtech lower grille.
IMO the fitment was close to perfect. I still need to adjust the left side of the front bumper by the headlight to raise it up about 1mm, but should be able to take care of that with a washer. The mtech kit makes a HUGE difference in terms of the look. I think the back bumper gives it a much wider and sportier stance. I was a little worried about how the mesh black wheels would look, but Im still happy with the way the fit the kit. What do you guys think? Obviously the front bumper is a HUGE improvement from the stock one. I was going back and forth between the mtech front and the m5 front, but in the end i didn't want my car to look like an m5 because it's not an m5. I still want it to look somewhat stock but in a tasteful way. I felt the m5 front bumper was too non-stock looking since the OEM m5 front bumper doesn't have fog lights.
What do you guys think? Feel free to ask any questions on the install, thanks!
Chris
![](http://i54.photobucket.com/albums/g95/saltdog55/bmw_02.jpg)
![](http://i54.photobucket.com/albums/g95/saltdog55/bmw_07.jpg)
![](http://i54.photobucket.com/albums/g95/saltdog55/bmw_06.jpg)
![](http://i54.photobucket.com/albums/g95/saltdog55/bmw_05.jpg)
![](http://i54.photobucket.com/albums/g95/saltdog55/bmw_04.jpg)
PAINT: I got everything painted/wet sanded/polished for $1000 from a locally owned shop in Henderson, NV called "Image Makers Automotive" The color match was perfect and i couldn't be happier at the way it came out. I probably could have gotten it done a little cheaper somewhere else, but i didn't want to go cheap on the paint. I figured I'd already saved cash by purchasing a replica kit, so i decided to put some of that savings into the quality of the paint.
INSTALL: I decided to do the install myself to save about $300. With my experience working at a body shop during high school and all the DIY's available, i felt fairly comfortable doing the install. It was actually fairly simple. Out of all the pieces, obviously the side skirts were the easiest; taking about an hour to complete. There are about 8 or 9 screws underneath and the top clips in. IMO the rear bumper was the most difficult to install. It took about 3 hours, and after a few adjustments the fitment was perfect. The front bumper was actually easier than i thought. Most people who do the install themselves say the front bumper took the longest, but for me the was the rear bumper. Most of my time on the front bumper was taken by transferring over the fog lights, kidney grilles and PDC sensors, as well as the mtech lower grille.
IMO the fitment was close to perfect. I still need to adjust the left side of the front bumper by the headlight to raise it up about 1mm, but should be able to take care of that with a washer. The mtech kit makes a HUGE difference in terms of the look. I think the back bumper gives it a much wider and sportier stance. I was a little worried about how the mesh black wheels would look, but Im still happy with the way the fit the kit. What do you guys think? Obviously the front bumper is a HUGE improvement from the stock one. I was going back and forth between the mtech front and the m5 front, but in the end i didn't want my car to look like an m5 because it's not an m5. I still want it to look somewhat stock but in a tasteful way. I felt the m5 front bumper was too non-stock looking since the OEM m5 front bumper doesn't have fog lights.
What do you guys think? Feel free to ask any questions on the install, thanks!
Chris
![](http://i54.photobucket.com/albums/g95/saltdog55/bmw_02.jpg)
![](http://i54.photobucket.com/albums/g95/saltdog55/bmw_07.jpg)
![](http://i54.photobucket.com/albums/g95/saltdog55/bmw_06.jpg)
![](http://i54.photobucket.com/albums/g95/saltdog55/bmw_05.jpg)
![](http://i54.photobucket.com/albums/g95/saltdog55/bmw_04.jpg)
![](http://i54.photobucket.com/albums/g95/saltdog55/bmw_01.jpg)
#4
![Default](https://5series.net/forums/images/icons/icon1.gif)
OP,
Very nice...I might have to PM you later on about the installation process of both the front and rear once I decide on which kit I want to get. I really like the front lip but seems like the lip that Umnitza sells for their M5tech is a bit low so I'm leaning towards the Mtech rep kit at this time. Just waiting to see if those aftermarket lip will work with the bumper before I pull the trigger.
BTW, is your car lowered? Seems like from the side pic, the gap is very minimal.
Very nice...I might have to PM you later on about the installation process of both the front and rear once I decide on which kit I want to get. I really like the front lip but seems like the lip that Umnitza sells for their M5tech is a bit low so I'm leaning towards the Mtech rep kit at this time. Just waiting to see if those aftermarket lip will work with the bumper before I pull the trigger.
BTW, is your car lowered? Seems like from the side pic, the gap is very minimal.
#9
Contributors
Join Date: May 2008
Location: San Antonio, TX
Posts: 5,895
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 04 525i, 04 Dinan M3
![Default](https://5series.net/forums/images/icons/icon1.gif)
Yep I was, I never ordered the lip. Too afraid to rip it off, especially since I'm alot lower now.
#10
Members
Join Date: Jul 2011
Location: NYC
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2008 535i Alpine White w/ Gray Interior; Premium, Sports, Cold Weather; Comfort Access, NAV, iPod Adapter, Sat Radio
Upgrades: ★ OEM 166 (245/35F : 275/30R) ★ Motorcepts HID AEs & Fogs ★ License Plate LEDs ★ 35% Tints ★
Wish List: MTech Kit : Matte Black Kidney Grilles : R1 Concepts / Hawk Brake Kit : Blacked-out Orion Headlights
![Default](https://5series.net/forums/images/icons/icon1.gif)
Car looks amazing! Great job!