R1 Concept Premium Rotors
Thread Starter
Senior Members
Joined: Nov 2008
Posts: 843
Likes: 0
From: OC, SoCal
My Ride: '05 545i SMG, 35% Tint, LED Angel Eyes
Sup fellas!
With help from my awesome forum buddy John, we were able to swap out the rotors and pads this past weekend. I went with just the cross-drilled ones because it resembles the M5 brake rotors better than the cross-drilled with slots. The fronts were replaced with Hawk HPS pads and they bite very nicely after being bedded.
With help from my awesome forum buddy John, we were able to swap out the rotors and pads this past weekend. I went with just the cross-drilled ones because it resembles the M5 brake rotors better than the cross-drilled with slots. The fronts were replaced with Hawk HPS pads and they bite very nicely after being bedded.
Thread Starter
Senior Members
Joined: Nov 2008
Posts: 843
Likes: 0
From: OC, SoCal
My Ride: '05 545i SMG, 35% Tint, LED Angel Eyes
It might just be my imagination but I think I am still feeling bit of a spongy-ness in the brake pedal. I might take it back to the dealer and have them re-bleed it.
Contributors
Joined: May 2009
Posts: 10,496
Likes: 2
From: SoCal
My Ride: 2008 550I LOADED, all options except HUD and NV
It is possible some air got into the lines when it overflowed, have them check that. If so bleeding would definitely be in order.
Thread Starter
Senior Members
Joined: Nov 2008
Posts: 843
Likes: 0
From: OC, SoCal
My Ride: '05 545i SMG, 35% Tint, LED Angel Eyes


