Custom 20" BBS CH-R II's
#1
Senior Members
Thread Starter
Join Date: May 2009
Location: ct
Posts: 622
Likes: 0
Received 1 Like
on
1 Post
My Ride: alpine white 535 E61
Model Year: 08
Custom 20" BBS CH-R II's
Im listings these wheel for my friend. He had a deal set up with an F10 owner and they were tested to fit with no issuse.
They are currently 20x 9.5 et 40 front 20x10.5 et35 rear 10mm spacer for the front to make it flush can be included. F10 tpms also can be installed. My friend owns a shop so things can be arranged like install. Copy from his for sale ad.
"For Sale I have my 20" BBS CH-RII's that I built specifically for my F31 Shop car last year. I originally brought these in from the UK as they were not yet released in USA. They do not offer this fitment for F30/31/32. Wheels only have 6k miles on them.
Front-20x9.5 et40 with 8mm custom hubcentric spacers makes them final et32
Rear-20x10.5 et53 with 5mm spacers final et48
Both Front and Rear are perfectly flush fitment with no clearance issues. I lathed the outter rim edge to look like the RSii barrels and powdercoated them "wet black" done by Espo's Powdercoating. Assembly hardware was replaced with stainless steel gold bolts special order from Germany. I have multiple center cap options for buyers preference. Some caps in photo still have plastic protective wrap so ignore the cloudiness they are new.
Red/Gold
Black/Gold
Black/Silver
Carbon/Silver
Front Tires are 235/35/20 with 75/80% tread
MPSS K1 spec (OE Ferrari)
Rear Tires are 275/30/20 with 80/85% tread
MPSS
Wheels are Ceramic Coated as well with 3layers
Asking $4250.... It would cost over $7800 to recreate these."
Any question please ask.
They are currently 20x 9.5 et 40 front 20x10.5 et35 rear 10mm spacer for the front to make it flush can be included. F10 tpms also can be installed. My friend owns a shop so things can be arranged like install. Copy from his for sale ad.
"For Sale I have my 20" BBS CH-RII's that I built specifically for my F31 Shop car last year. I originally brought these in from the UK as they were not yet released in USA. They do not offer this fitment for F30/31/32. Wheels only have 6k miles on them.
Front-20x9.5 et40 with 8mm custom hubcentric spacers makes them final et32
Rear-20x10.5 et53 with 5mm spacers final et48
Both Front and Rear are perfectly flush fitment with no clearance issues. I lathed the outter rim edge to look like the RSii barrels and powdercoated them "wet black" done by Espo's Powdercoating. Assembly hardware was replaced with stainless steel gold bolts special order from Germany. I have multiple center cap options for buyers preference. Some caps in photo still have plastic protective wrap so ignore the cloudiness they are new.
Red/Gold
Black/Gold
Black/Silver
Carbon/Silver
Front Tires are 235/35/20 with 75/80% tread
MPSS K1 spec (OE Ferrari)
Rear Tires are 275/30/20 with 80/85% tread
MPSS
Wheels are Ceramic Coated as well with 3layers
Asking $4250.... It would cost over $7800 to recreate these."
Any question please ask.