As many of you know I've had my car listed for sale since last month, but I stated that if the sale didn't happen by the end of the year I was just going to keep it and continue modding away. Anyways, I just wanted to see if there was any interest in my current setup. If I do end up keeping the carI think I may be pulling the trigger on some DPE's but only if these are sold. All the wheels are straight, true with no bends and all but one are near mint condition. The front driver has some very light rash from when the wheel rubbed up against my fender prior to rolling them.

here's some answers to questions I've anticipated

• the offsets are 18 in the front and 25 in the rear
• the front wheels are 8.5" and the rears are 10"
• both the tires and wheels have been on the car for only 6 months (roughly 6k miles)
• tires have a crapload of life left. nearly 75%
• tire sizes are 245/ 35/ 20 in the front and 285/30/20 in the rear Nexxen's

I'll have detailed pics any and all flaws on the wheels up later when the sun's out.

The first pic is the one with the rash. As you can see it's hardly noticeable, however it is there.

 

Geez those rims are nice! I wish I was back in Cali. Do you plan on doing a local pick up only? Is international shipping a possibility if buyer covers the cost?

 

As in most cases shipping is not preferred, but I will still cater to the buyer if there is no local interest. However, I believe shipping overseas would cost an arm and a leg. The Vertini's really aren't that expensive. Last time I checked I saw my current setup for 2k before taxes. (w/o tires of course)

 

GOOD deal! , wish the offsets weren't so aggressive though.

 

I don't think 18 front and 25 back are "so" aggressive.



GLWS to OP.

 

yea, it's actually not. It's pretty much spot on and flush. the fronts are flush at 18 and the rears are also at 25 since the width of the rear is 10".

 

I don't want to roll my fenders on this car, matter of opinion I guess, but this deal is tempting.

 

Is your car lowered? If it's not or just on a regular sport suspension you'll be fine. 18 and 25 offsets do not require rolled fenders. I had to roll my fenders after I dropped my car another inch.

 

Oh.... I'm not lowered right now but I don't know how it'll look at stock height with these wheels. Do you have any photos of your car with these wheels prior to the drop? Thanks

 

Here are some photos I took prior to the drop. It cleared everything perfectly with no rubbing issues. This is on stock Sport suspension