E60 KW v2 Coils + KMac Camber Plates
06-03-2013, 04:09 PM
#1
New Members
Thread Starter
Join Date: Apr 2012
Location: Virginia
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
E60 KW v2 Coils + KMac Camber Plates
Asking $1400
KW v2 Coilovers and KMac Camber Plates for E60
Bought these used a couple months ago. Previous owner estimated 9k miles on them, i probably put another 1500 or so on them. Still in excellent condition, only issue (pictured below) on initial install I had the inner lip of one of my wheels intermittently rubbing one of the springs in the front for a day until i could take care of it. I put some thick black paint on the spring in that spot to prevent rust/corrosion. Not very appealing but it gets the job done + once on the car you don't see it anyway.
The rear top hats are OEM BMW and fairly new (PO purchased them for their install)
I will include all the original paperwork, stickers, spanner wrench, etc.
Only thing you need is a 2mm allen key for the lower spring perch set screws.
Reason for sale: I have since reverted the car to stock and plan on trading up for a newer model.
KW v2 Coilovers and KMac Camber Plates for E60
Bought these used a couple months ago. Previous owner estimated 9k miles on them, i probably put another 1500 or so on them. Still in excellent condition, only issue (pictured below) on initial install I had the inner lip of one of my wheels intermittently rubbing one of the springs in the front for a day until i could take care of it. I put some thick black paint on the spring in that spot to prevent rust/corrosion. Not very appealing but it gets the job done + once on the car you don't see it anyway.
The rear top hats are OEM BMW and fairly new (PO purchased them for their install)
I will include all the original paperwork, stickers, spanner wrench, etc.
Only thing you need is a 2mm allen key for the lower spring perch set screws.
Reason for sale: I have since reverted the car to stock and plan on trading up for a newer model.
Last edited by tiber530i; 06-16-2013 at 04:32 PM.
06-04-2013, 10:45 AM
#2
New Members
Join Date: Oct 2012
Location: LA
Posts: 284
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 650i 6sp
Model Year: 2008
Engine: 4.8l V8
Willing to sell the camber plates separately? You bought from PO before I had a chance to make sure the measurements worked for my air suspension on my e61.
