2 Alpine Type E Subwoofers with Kenwood Amp and Carpeted Box! A DE
09-27-2008, 09:35 AM
#1
Senior Members
Thread Starter
Join Date: Jul 2008
Location: VA/DC Area
Posts: 656
Likes: 0
Received 0 Likes
on
0 Posts
PLEASE ASK IF YOU WANT TO SEE PICTURES!!!!
IM ASKING $350 AND LOCAL PICKUP ONLY...Because this item is very heavy! I live in Northern VA and am willing to drive up to 20 miles to meet you.
Comes with BOX and AMP! All you need are the wires and your SET!
Affordable Alpine Type-E subwoofers add a solid shot of bass to your system without draining your bank account. These subs handle up to 25% more power than previous Type-E models, but still use the same tried-and-true design that's made this line so popular with budget-conscious bassheads.
The SWE-1242 12" subwoofer uses a pulp cone reinforced with Kevlar? that responds quickly, yet is very durable. A Santoprene? rubber surround controls the cone's extended movement for powerful and accurate low-frequency response. Alpine builds the heavy-gauge, custom-stamped steel frame to stand up to the demands of hard playing, while the sub's extended pole piece is vented to dissipate heat and control distortion.
Details:
* 12" 4-ohm subwoofer
* Kevlar?-treated pulp woofer cone with Santoprene rubber surround
* dual oversized Nomex? spiders
* frequency response: 28-1,000 Hz
* power range: 50-250 watts RMS
* peak power: 750 watts
* sensitivity: 89 dB
Product Information
The KAC-7202 features a MOSFET switching power supply for clean, consistent power. The engineers at Kenwood also designed these amps to fight dreaded unwanted noise by using a large torroidal noise suppression filter and a copper EE core power transformer. Installation is a snap with speaker level inputs and gold-plated screw type connections. The black anodized, sandblast finish heat sink not only looks great, it helps the KAC-7202 keep its cool when you pour on the volume. Features switchable low-pass filter and high-pass filter.
Product MPN
MPN KAC7202
Amplifier Type Dual Channel
RMS Power at 4 Ohms 150 W x 2
RMS Power at 2 Ohms 230 W x 2
Frequency Response 10 Hz - 45000 Hz
Signal to Noise Ratio 100 dB
THD at Rated RMS Power 0.08 %
Bass Boost With Bass Boost
Bass Boost Frequency 40 Hz
Low - Pass Frequency 50 Hz - 200 Hz
High - Pass Frequency 50 Hz - 200 Hz
MOSFET Circuitry Yes
3 Way Ready Yes
Hi there i have a used kenwood kdc 7202 series amplifier stereo bridgeable power amp rms 150 wattsx2 4 ohms' rms 230 wattsx2 2 ohms max power 920 watts rms bridge 460 watts 4 ohms this is a nice piece of machinery and it works with no problems at all
IM ASKING $350 AND LOCAL PICKUP ONLY...Because this item is very heavy! I live in Northern VA and am willing to drive up to 20 miles to meet you.
Comes with BOX and AMP! All you need are the wires and your SET!
Affordable Alpine Type-E subwoofers add a solid shot of bass to your system without draining your bank account. These subs handle up to 25% more power than previous Type-E models, but still use the same tried-and-true design that's made this line so popular with budget-conscious bassheads.
The SWE-1242 12" subwoofer uses a pulp cone reinforced with Kevlar? that responds quickly, yet is very durable. A Santoprene? rubber surround controls the cone's extended movement for powerful and accurate low-frequency response. Alpine builds the heavy-gauge, custom-stamped steel frame to stand up to the demands of hard playing, while the sub's extended pole piece is vented to dissipate heat and control distortion.
Details:
* 12" 4-ohm subwoofer
* Kevlar?-treated pulp woofer cone with Santoprene rubber surround
* dual oversized Nomex? spiders
* frequency response: 28-1,000 Hz
* power range: 50-250 watts RMS
* peak power: 750 watts
* sensitivity: 89 dB
Product Information
The KAC-7202 features a MOSFET switching power supply for clean, consistent power. The engineers at Kenwood also designed these amps to fight dreaded unwanted noise by using a large torroidal noise suppression filter and a copper EE core power transformer. Installation is a snap with speaker level inputs and gold-plated screw type connections. The black anodized, sandblast finish heat sink not only looks great, it helps the KAC-7202 keep its cool when you pour on the volume. Features switchable low-pass filter and high-pass filter.
Product MPN
MPN KAC7202
Amplifier Type Dual Channel
RMS Power at 4 Ohms 150 W x 2
RMS Power at 2 Ohms 230 W x 2
Frequency Response 10 Hz - 45000 Hz
Signal to Noise Ratio 100 dB
THD at Rated RMS Power 0.08 %
Bass Boost With Bass Boost
Bass Boost Frequency 40 Hz
Low - Pass Frequency 50 Hz - 200 Hz
High - Pass Frequency 50 Hz - 200 Hz
MOSFET Circuitry Yes
3 Way Ready Yes
Hi there i have a used kenwood kdc 7202 series amplifier stereo bridgeable power amp rms 150 wattsx2 4 ohms' rms 230 wattsx2 2 ohms max power 920 watts rms bridge 460 watts 4 ohms this is a nice piece of machinery and it works with no problems at all
Thread
Thread Starter
Forum
Replies
Last Post
bestofthebest
Complete Car Sales
4
03-28-2016 02:47 PM
DetailersDomain
Detailing Forum
0
09-22-2015 03:59 PM
Florida2002m3
Private Member Classifieds
0
09-01-2015 10:59 AM