Mtec Angel Eyes - In Stock - $73.49 + Shipping
#1
Former Vendor
Thread Starter
http://www.umnitza.com/product_info....oducts_id=5634
This the same product as everywhere else, but we are going to offer this price to the first 10 buyers only, then it will be back to the MAP of $99 shipped.
The benefits of this product are:
1) Single connector for E60 and E39 type
2) Cost
3) No external resistor
4) Brighter than Racedash Product
Some negatives are:
1) Not as bright as Predator ICE only 3W
2) May (though not likely) cause an error on some E60s
This the same product as everywhere else, but we are going to offer this price to the first 10 buyers only, then it will be back to the MAP of $99 shipped.
The benefits of this product are:
1) Single connector for E60 and E39 type
2) Cost
3) No external resistor
4) Brighter than Racedash Product
Some negatives are:
1) Not as bright as Predator ICE only 3W
2) May (though not likely) cause an error on some E60s
#7
Contributors
Join Date: Jul 2007
Location: San Jose, CA
Posts: 140
Likes: 0
Received 0 Likes
on
0 Posts
Will this work with my halogen setup?
Originally Posted by umnitza' post='858696' date='Apr 25 2009, 05:04 PM
Thanks, we have a few left at this price. Once those are out, we're going to have to raise it to $99 shipped.
#8
Contributors
Join Date: Jun 2008
Location: Orlando, FL
Posts: 292
Likes: 0
Received 0 Likes
on
0 Posts
I saw this towards the bottom of the description page:
"In discussing with a tech at BMW, it is as follows:
E39 - Simple plug and play no headlight removal required
E53 - Simple plug and play no headlight removal required
E60 - Headlights remove via 2 bolts and jigsaw puzzle removal (no bumper removal required) somewhat difficult to install due to tight dimensions"
This product looks excellent for the price and is all the brightness I was really after, but the install has me concerned because I'm anything but handy with tools.
Would a guy who installs custom radios in cars for a living be able to easily do this you think? We have a friend who can take apart any car, including ours, so I'll ask him if you guys think his profession sounds like a good match.
"In discussing with a tech at BMW, it is as follows:
E39 - Simple plug and play no headlight removal required
E53 - Simple plug and play no headlight removal required
E60 - Headlights remove via 2 bolts and jigsaw puzzle removal (no bumper removal required) somewhat difficult to install due to tight dimensions"
This product looks excellent for the price and is all the brightness I was really after, but the install has me concerned because I'm anything but handy with tools.
Would a guy who installs custom radios in cars for a living be able to easily do this you think? We have a friend who can take apart any car, including ours, so I'll ask him if you guys think his profession sounds like a good match.
#9
Contributors
Join Date: Jan 2007
Location: Orlando, FL
Posts: 1,615
Likes: 0
Received 3 Likes
on
3 Posts
My Ride: 2005 530i Silver Gray/ Gray Leather. SP,PP
Originally Posted by 06530-6M' post='865864' date='May 2 2009, 01:02 AM
I saw this towards the bottom of the description page:
"In discussing with a tech at BMW, it is as follows:
E39 - Simple plug and play no headlight removal required
E53 - Simple plug and play no headlight removal required
E60 - Headlights remove via 2 bolts and jigsaw puzzle removal (no bumper removal required) somewhat difficult to install due to tight dimensions"
This product looks excellent for the price and is all the brightness I was really after, but the install has me concerned because I'm anything but handy with tools.
Would a guy who installs custom radios in cars for a living be able to easily do this you think? We have a friend who can take apart any car, including ours, so I'll ask him if you guys think his profession sounds like a good match.
"In discussing with a tech at BMW, it is as follows:
E39 - Simple plug and play no headlight removal required
E53 - Simple plug and play no headlight removal required
E60 - Headlights remove via 2 bolts and jigsaw puzzle removal (no bumper removal required) somewhat difficult to install due to tight dimensions"
This product looks excellent for the price and is all the brightness I was really after, but the install has me concerned because I'm anything but handy with tools.
Would a guy who installs custom radios in cars for a living be able to easily do this you think? We have a friend who can take apart any car, including ours, so I'll ask him if you guys think his profession sounds like a good match.