OBD on iDrive
#1
Senior Members
Thread Starter
Join Date: Oct 2009
Location: Indiana, USA
Posts: 1,380
Likes: 0
Received 3 Likes
on
3 Posts
My Ride: 2007 530xi: Sport, NAV, PDC, HUD, Cold Wthr, CA, Logic 7, HD Radio, SAT, Custom NCS coded options 2008 535xi: Sport, Night Vision, NAV, PDC, HUD, Cold Wthr, CA, Logic 7, SAT, Custom NCS coded options, Rear Seat Heat Retrofit, Passport 9500ci
Model Year: 2008
Engine: N54
Our cars lack the ability to monitor simple safety measures such as oil and water temps. After market OBD readers have been around a long time which will display these readings among many other valuable diagnostic readings such as fuel trim, O2 sensors, boost, and so on. What I have never liked about these is the limited usability to use while driving on the road or track. Attaching another screen does not appeal to me.
My next project in the queue is OBD on iDrive. Take readings from either OBD port or straight from the can bus and display on the iDrive monitor.
This pic shows my first trial run. The display on the iDrive screen is real but the readings you see are simulated - there is no connection to the can bus yet
My next project in the queue is OBD on iDrive. Take readings from either OBD port or straight from the can bus and display on the iDrive monitor.
This pic shows my first trial run. The display on the iDrive screen is real but the readings you see are simulated - there is no connection to the can bus yet
#2
Senior Members
Join Date: Jan 2010
Location: Netherlands
Posts: 400
Likes: 0
Received 1 Like
on
1 Post
My Ride: 2004 E61 530D - Dynamic Drive - Active Front Steering Sport Seats - Voice Control - Head Up Display - Nav Pro - Bluetooth - Panoramic roof - Front/rear heated seats
Wow, that would be one of the most useful mods ever.
Been wishing for something like this for years!
Been wishing for something like this for years!
#7
Yes, I'd really like to be able to do this also. Great work! What are you planning to use to interface with the OBD or CANBUS?
Have you seen the prototype iDrivino that interfaces with the Procede? iDrivino
That thread may have some insight for you. I'd buy one of those if it ever comes to market.
Have you seen the prototype iDrivino that interfaces with the Procede? iDrivino
That thread may have some insight for you. I'd buy one of those if it ever comes to market.
#8
Senior Members
Thread Starter
Join Date: Oct 2009
Location: Indiana, USA
Posts: 1,380
Likes: 0
Received 3 Likes
on
3 Posts
My Ride: 2007 530xi: Sport, NAV, PDC, HUD, Cold Wthr, CA, Logic 7, HD Radio, SAT, Custom NCS coded options 2008 535xi: Sport, Night Vision, NAV, PDC, HUD, Cold Wthr, CA, Logic 7, SAT, Custom NCS coded options, Rear Seat Heat Retrofit, Passport 9500ci
Model Year: 2008
Engine: N54
Yes, I'd really like to be able to do this also. Great work! What are you planning to use to interface with the OBD or CANBUS?
Have you seen the prototype iDrivino that interfaces with the Procede? iDrivino
That thread may have some insight for you. I'd buy one of those if it ever comes to market.
Have you seen the prototype iDrivino that interfaces with the Procede? iDrivino
That thread may have some insight for you. I'd buy one of those if it ever comes to market.
#9
Senior Members
Thread Starter
Join Date: Oct 2009
Location: Indiana, USA
Posts: 1,380
Likes: 0
Received 3 Likes
on
3 Posts
My Ride: 2007 530xi: Sport, NAV, PDC, HUD, Cold Wthr, CA, Logic 7, HD Radio, SAT, Custom NCS coded options 2008 535xi: Sport, Night Vision, NAV, PDC, HUD, Cold Wthr, CA, Logic 7, SAT, Custom NCS coded options, Rear Seat Heat Retrofit, Passport 9500ci
Model Year: 2008
Engine: N54