E60 535i transmission flashing went wrong! Help!
#1
New Members
Thread Starter
Join Date: Jan 2017
Location: Dubai
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: Bmw e60 535i 08
E60 535i transmission flashing went wrong! Help!
hello everybody.
I did an alpina b3 transmission flash to my e60 535i 08 yesterday and the car does not move anymore. It starts normally but i cannot shift gears nor use the gear at all.
I tried flashing it back to the OEM EGS transportation software using both INPA and WinKFP (GKE 214) but WinKFP gave me error 201 saying hardware or ecu not
compatible.
I have attached some screenshots. Any help would be HIGHLY APPRECIATED. I need to reflash it back to the stock OEM factory software.
Thanks in advance
I did an alpina b3 transmission flash to my e60 535i 08 yesterday and the car does not move anymore. It starts normally but i cannot shift gears nor use the gear at all.
I tried flashing it back to the OEM EGS transportation software using both INPA and WinKFP (GKE 214) but WinKFP gave me error 201 saying hardware or ecu not
compatible.
I have attached some screenshots. Any help would be HIGHLY APPRECIATED. I need to reflash it back to the stock OEM factory software.
Thanks in advance
Last edited by Moimotref; 01-24-2017 at 06:27 AM. Reason: Low quality images