hermman , thanks a lot but what do you mean with gearbox and shiftboks ? du you mean the ecu of the transmission gear ?

 

hi Bert.
Yes. Only ECU transmission gear.

P.S. Shiftbox - is selector of gear with Sport button.

 

the correct name of this ecu is EGS

okey ... can you tell us that step by step what is to do ?

 

Here are the options available in the EGS module:


Paddles is the only value that gets changed as far as I know.

NIC
nicht_aktiv not active
* aktiv active
EL_INTERLOCK
aktiv active
* nicht_aktiv not active
PADDLES
* wert_00 value 00
wert_01 value 01
wert_02 value 02
SEAT
* wert_00 value 00
wert_01 value 01
OBD_PFC
* wert_00 value 00
wert_01 value 01
ISO_OBD
wert_01 value 01
wert_02 value 02
* wert_03 value 03
wert_04 value 04
MIL_SCAN_TOOL
* wert_01 value 01
wert_02 value 02
wert_03 value 03
wert_04 value 04

 

NoQuarter , i think hermman should us clear up over it what his codierer has done .
maybe it is not the EGS ... an other -unknown- ecu

 

I think hermman's coder has FLASHED a new firmware. This is different then coding. I believe he fed new firmware into old shiftbox using WinKFP or like tools. Resistors he soldered on pcb was perhaps for sports button to work.

Does steering go stiff aswell hermman?

 

I got SAT installed yesterday and it was functional just after the hardware swap except the cosmetics of SPORTS sign on the speedo cluster everything was working without coding. As soon as I pressed the sports button steering was very stiff and required a lot of extra power to rotate, press sports button again and everything back to normal. There was not hesitation or glitch in gear change. I have 535d and always felt the lag at lower end and had a doubt it could be the gear shifting at wrong time, believe me after SAT there is no lag. I may be over excited but this is initial feel, damp roads aren't suitable to test and try this so will confirm it later once I get chance to try it a few times. If I floor it rear-end starts going places (obviously DSC deactivated) or car starts bouncing. Its so much torque it can't be contained. I have made a video of old shifter's rpm and shifting pattern before putting this on, I will film this too and compare the shift time later.

Just for my own satisfaction later I coded $2TB, took off $205 (or whatever for normal auto) and coded KOMBI and SPORTS appeared too. One slight glitch was rpm needle wasn't moving after coding KOMBI but changing RPM in trace fixed that. Not sure how you guys get S1-S6 I don't get S but I get M instead like M1-M6. Do I need to flash with EGS with different firmware? Can someone guide me here, don't want to fry EGS with wrong firmware.

All in all a good update and didn't cost much. I paid £200 for parts on eBay and £10 for postage. All coding done on my own. No steering wheel change just the shifter.

 

hermman is the only by retrofited SAT and S1-S6 .... i dont know nobody else and we dont know what hermman has done .

AI001 an what date was your car build , typ ?

 

03/07, E60N 535d Saloon.

 

Some shots: