retrofit headlights to lci from pre-lci need wiring diagram???
 

hey i want to assemble the new facelift headlights on my BMW E60 my car is pre-LCI 2005. I was wondering if anyone fitted these without coding? by the way this is what i want to upgrade from


the old pre- lci headlights

Attachment 147781



to the new Lci headlights:D:D:D

[ATTACH]147782[/ATTACH


not my pics

Hey ricki, check this post out: https://5series.net/forums/e60-parts...13/#post561074

It includes the .pdf of BMW's installation/wiring instructions. Note that there may be mismatched pins, the post explains it specifically. Also check this thread out: https://5series.net/forums/diy-do-yo...nstall-114185/

You can never do too much reading when you're attempting to take on a project of this magnitude. Also, without coding your angel eyes won't stay lit, you'll have some other issues too. No way around it, you need to code the LCM II after installing it.

AFAIK you could skip buying the LCM II, coding, wiring, tails etc and simply plug and play the LCI headlights, but they wouldn't work properly. (The angel eyes only stay lit for a few seconds, etc)

or buy some aftermarket lci like lights off ebay. lol

Attachment 165527

If you had pre lci BI xenons (i.e. the xenons worked when you used full beam) then yes, you could fit them without coding, you would need to fit 10w led angel eyes otherwise the angel eyes wouldn't work.

If you didn't have xenon full beams with your current set up then you will not get that function in your lci headlight, if that picture is an EXACT, IDENTICAL picture of the lci headlights you have. If you have one with cornering lights, DO NOT use full beams at all, unless you code the car.

your pre lci is adaptive. the one you pointing lci is non adaptive. you will get cornering lights error in idrive. you have to go for lci adaptive, but then you have to get lm2 otherwise your cornering will work as full beam.

thanks guys for all your repaly and the good information about the retrofit i tried to fit the headlights but realized the the connector are diffrent in pre-lci so I orderd some cables and conectors.

going to wiring up something like this now that i found the diagram here in the forum.

http://www.bmw-driver.net/forum/atta...1&d=1351348830

I've seen them before there are some other models also but orginala LCI looks hotter :D:D

i'd be curious how these look in real life. they have design cues from the newer 5 series.

It would be nice to see this in real life how the headlights look.
Do you now any member here who installed this on his car? Or are there pictures so we can take a look how they fit on the car

those aftermarket headlights look terrible

[QUOTE=ricki_;1562491]thanks guys for all your repaly and the good information about the retrofit i tried to fit the headlights but realized the the connector are diffrent in pre-lci so I orderd some cables and conectors.

going to wiring up something like this now that i found the diagram here in the forum.

http://www.bmw-driver.net/forum/atta...1&d=1351348830
Good afternoon! Just wanted to know how everything went with your project, and also how much of a help were this connectors for the project? I do have an e61 non lci and got a pair of lci. Just looking for some advice here. Thanks in advance!

Do you have xenon in your old pre-lci headlights?
Too make the lci headlights work you need to bay the lm2 Light module from lci car and get it coded in to The car to make The Lights work propely.

​​​
​

Lci headlight
 

Hello all, srry for bringing this thread bCk but I have a few questions.

i have a LM2 coded to my pre lci car, build date of 03/06.

retro fitted lci tail lights with the oem adapters, and kept the PRE LCI headlights.

now I want to do the lci headlights, would this be just a direct swap after doing the re pin to the lci plug , or
woild attritional coding need to be done ?

my pre lci headlights work 100%