Refinishing headlights
10-09-2009 | 05:46 PM
#1
Thread Starter
Contributors
Joined: Oct 2008
Posts: 946
Likes: 0
From: Ft. Lauderdale, FL
My Ride: 2004 545i, Sport and Premium package, Titanium Silver with Black Dakota Leather interior
Been to home depot and pep boys, no luck.
Where can I find this very fine, wet-sand sandpaper?
Where can I find this very fine, wet-sand sandpaper?
10-11-2009 | 06:56 AM
#3
Members
Joined: Jul 2009
Posts: 13
Likes: 0
Originally Posted by rogerj' post='1028982' date='Oct 9 2009, 08:46 PM
Been to home depot and pep boys, no luck.
Where can I find this very fine, wet-sand sandpaper?
Where can I find this very fine, wet-sand sandpaper?
10-11-2009 | 07:16 AM
#4
Members
Joined: Mar 2005
Posts: 202
Likes: 0
From: Phoenix, AZ, USA
My Ride: 2006 530i - Sport - 6spd - Orient Blue with Auburn/Anthracite
Originally Posted by rogerj' post='1028982' date='Oct 9 2009, 06:46 PM
Been to home depot and pep boys, no luck.
Where can I find this very fine, wet-sand sandpaper?
Where can I find this very fine, wet-sand sandpaper?
http://www.stewmac.com/shop/Finishing_supp...ing_Papers.html
Good luck!
10-11-2009 | 08:10 AM
#5
Members
Joined: Apr 2009
Posts: 136
Likes: 0
This is all you need to get perfect lights. Comes with compound and drill attachment. I did my lights and it got rid of the peeling coating. What good was the coating if it is failing? I picked up some painters tape while I was at it and taped around the lights a few inches. I had my wife run a small stream of water to wet sand and keep everything cool. I laid blankets over the engine bay and on the sides of the car. This kept the engine clean while polising the headlights. I didn't use water on the compound stage. But there is more then enough to do both lights.
10-11-2009 | 08:22 AM
#6
Contributors
Joined: Dec 2007
Posts: 8,998
Likes: 1
From: St. Louis Burbs, USA
My Ride: 2007 530i. Purchased 6/28/07. Titanium Silver Metallic, Black Dakota Leather, Dark Poplar Trim, Steptronic, Premium Package, Cold Weather Package, Bluetooth, Adaptive Control Xenons. 10/30/07 Added OEM 124s with 245/40/18 & 275/35/18 Michelin Pilot Sport A/S tires. Installed red Cal Covers� from BavAuto. 11/21/07 Added OEM all-weather floor mats (for winter, carpet in summer) and coat rack. 6/26/08 installed M5-style rear spoiler. 6/30/08 put on red reflectors. 8/22/08 Euro turn signal stickers applied. 3/20/09 Installed Shadowline Trim. 3/27/09 Added Matte Black Kidney Grilles from Trinity. 4/03/09 Installed Bimmian Shadow Matte Black 530i Badges. 4/04/09 Installed LED license plate lights from Trinity. 5/01/09 Installed Brabus Interior LED Kit and White Angel Eyes. 5/02/09 Put in Brabus 6K Fogs. 5/14/09 Removed charcoal filter. 5/15/09 Installed light smoke LED side marker lamps from Trinity. 5/21/09 Sprint Booster. 6/12/09 Painted exhaust tips flat black. 6/13/09 Pulled red Cal Covers and painted calipers low gloss black. 6/27/09 RPI Ram Air Scoop from Trinity. 8/15/09 Installed Brabus's silver invisibulbs front and rear. 9/24/09 Installed R-Dash license plate LEDs from Brabaus (John).
Originally Posted by jprovence' post='1029813' date='Oct 11 2009, 11:10 AM
3M headlight restoration kit
This is all you need to get perfect lights. Comes with compound and drill attachment. I did my lights and it got rid of the peeling coating. What good was the coating if it is failing? I picked up some painters tape while I was at it and taped around the lights a few inches. I had my wife run a small stream of water to wet sand and keep everything cool. I laid blankets over the engine bay and on the sides of the car. This kept the engine clean while polising the headlights. I didn't use water on the compound stage. But there is more then enough to do both lights.
This is all you need to get perfect lights. Comes with compound and drill attachment. I did my lights and it got rid of the peeling coating. What good was the coating if it is failing? I picked up some painters tape while I was at it and taped around the lights a few inches. I had my wife run a small stream of water to wet sand and keep everything cool. I laid blankets over the engine bay and on the sides of the car. This kept the engine clean while polising the headlights. I didn't use water on the compound stage. But there is more then enough to do both lights.
Thread
Thread Starter
Forum
Replies
Last Post
Vman33
Complete Car Sales
5
03-14-2022 04:43 AM
umnitza
E60, E61 Parts, Accessories and Mods
9
11-25-2015 11:10 AM
wooboodoo
Private Member Classifieds
11
10-25-2015 02:58 PM
timmay77
E61 Touring Discussion
2
09-23-2015 12:34 AM