I'm thinking about going with the MRR GT1 in silver with a polished lip on my Sapphire Black 535i. 19x8.5 w/ 245-35 tire in front, and 19x9.5 w/ 275-30 tire in the rear. The front offset is 20mm and the rear is 24mm. I'll also be adding Eibach Prokit springs. First off, does anyone have this combo, or has anyone seen this combo? With those offsets would 12 or 15 mm spacers be needed to bring the rear tire flush with the fender? I appologize for being a noobie, and as always, I thank you for your advice and comments. (edit-these aren't my wheels...just found the pics on the internet.)

 

Hey ArticT they look sharp to me

I was looking at these...
http://forums.e60.net/index.php?showtopic=43727

 

No offense, but i'm not a big fan.

I have the M6 replicas on my ride, check them out...

http://modbargains.com/product.aspx?...o%5FType%5F346

 

ziad, what offset and sizes did you go with??

 

nice wheels. for the rear wheels to be flushed with the rear fenders, an offset of about ET16 or 17 is desired. even just a 10mm spacer in the rear would give an offset of ET14. as for the combo with the eibach pro-kit, a good number of members have it, including myself, and they are great springs to go with. good luck with the mods. hope this helps.

 

My wheels are very similar. I only had the wheel centres colour coded in carbon black.

Sizes on mine are 8.5x20 ET20 and 10x20 ET20. I also ride on Eibach Pro Kit. Not the slightest problem. With these offsets you'll even have some space left to the arch.(fender)

 

Those look real good, have a deepdish look,

Nice

I have the M5 rep 20in