Non M-Tech Hamann-type lip
#1
Contributors
Thread Starter
Join Date: Aug 2008
Location: Zoo York
Posts: 9,986
Likes: 0
Received 1 Like
on
1 Post
My Ride: Alpine White 2006 530Xi (SLD)
trying to clear something up here:
I bought a carbon fiber Hamann-type lip for my pre-LCI non M-Tech bumper. When I tried to have it installed by my local shop, they said that without heavy modifications to the bumper (which, they said, will cost me approx $500 for the whole install), the lip wouldn't hold, as the contact surfaces of the lip do not fit flush to the bumper, therefore the lip "will become loose and eventually just get ripped off by the wind at highway speeds" - did I go to the wrong shop?
Any info will be much appreciated! thanks!
I bought a carbon fiber Hamann-type lip for my pre-LCI non M-Tech bumper. When I tried to have it installed by my local shop, they said that without heavy modifications to the bumper (which, they said, will cost me approx $500 for the whole install), the lip wouldn't hold, as the contact surfaces of the lip do not fit flush to the bumper, therefore the lip "will become loose and eventually just get ripped off by the wind at highway speeds" - did I go to the wrong shop?
Any info will be much appreciated! thanks!
#2
Members
Join Date: Jan 2008
Location: Cape Cod, MA
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2008 335i, Jet Black / Terra Dakota, 15k miles
Originally Posted by 530goinon850' post='811261' date='Mar 9 2009, 12:55 AM
trying to clear something up here:
I bought a carbon fiber Hamann-type lip for my pre-LCI non M-Tech bumper. When I tried to have it installed by my local shop, they said that without heavy modifications to the bumper (which, they said, will cost me approx $500 for the whole install), the lip wouldn't hold, as the contact surfaces of the lip do not fit flush to the bumper, therefore the lip "will become loose and eventually just get ripped off by the wind at highway speeds" - did I go to the wrong shop?
Any info will be much appreciated! thanks!
I bought a carbon fiber Hamann-type lip for my pre-LCI non M-Tech bumper. When I tried to have it installed by my local shop, they said that without heavy modifications to the bumper (which, they said, will cost me approx $500 for the whole install), the lip wouldn't hold, as the contact surfaces of the lip do not fit flush to the bumper, therefore the lip "will become loose and eventually just get ripped off by the wind at highway speeds" - did I go to the wrong shop?
Any info will be much appreciated! thanks!
Hard to tell if it's the shop or the lip, but that is a chance you take with buying replica goods. Where did you get it from? Sometimes you just have to bite the bullet and get the real deal...
#3
Contributors
Thread Starter
Join Date: Aug 2008
Location: Zoo York
Posts: 9,986
Likes: 0
Received 1 Like
on
1 Post
My Ride: Alpine White 2006 530Xi (SLD)
Originally Posted by aBathingApe' post='811938' date='Mar 9 2009, 07:04 PM
Hard to tell if it's the shop or the lip, but that is a chance you take with buying replica goods. Where did you get it from? Sometimes you just have to bite the bullet and get the real deal...
#4
Members
Join Date: Jan 2008
Location: Cape Cod, MA
Posts: 209
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2008 335i, Jet Black / Terra Dakota, 15k miles
Originally Posted by 530goinon850' post='812181' date='Mar 10 2009, 12:58 AM
Honestly, I got it from eBay - some seller in Taiwan. What sold me on it, was the fact that his listing said "100% fitment, no problems with fitment..." etc. I will try to get it mounted at another shop as soon as I get my car back from service (hopefully) this week... I'm just wondering if some shops know some kind of "secret" to mounting these things, cuz the seller that I got the lip from has 99.8% positive feedback and he apparently deals in replica aerodynamic parts - how could he have almost no negative feedback if his stuff is not worth the money???!!! you know... but then again, these days, life's just not to be expected to be fair, is it?
Yeah I definitely understand. I got both my roof spoiler and trunk spoiler (replicas) from ebay, painted and shipped from china. Luckily mine seem to fit good enough, but then again they just go on with 3M tape. I'd take it to another shop and see what they say. Also, why not try fitting it yourself, just to see if it is flush or not. Front lips are usually a pretty easy DIY anyways?
#6
Contributors
Thread Starter
Join Date: Aug 2008
Location: Zoo York
Posts: 9,986
Likes: 0
Received 1 Like
on
1 Post
My Ride: Alpine White 2006 530Xi (SLD)
When I took it to the shop, I was on the floor with the guys trying to mock it up. I saw exactly what the problem is: the contact surfaces on the lip are not an exact fit to the curves of the bumper. This means that if it is installed without any agent between the bumper and the lip, it will fast become loose from air rushing through it at highway speeds and basically fall off eventually. The shop did tell me that they could theoretically fabricate some parts to make it work, but they said it will cost me twice the price of the lip...
Originally Posted by aBathingApe' post='812663' date='Mar 10 2009, 02:53 PM
Yeah I definitely understand. I got both my roof spoiler and trunk spoiler (replicas) from ebay, painted and shipped from china. Luckily mine seem to fit good enough, but then again they just go on with 3M tape. I'd take it to another shop and see what they say. Also, why not try fitting it yourself, just to see if it is flush or not. Front lips are usually a pretty easy DIY anyways?
#7
Contributors
Join Date: Feb 2008
Location: Fullerton, CA
Posts: 4,074
Likes: 0
Received 0 Likes
on
0 Posts
you should have contacted john@eurorev or nerwyll from trinity autosports. they would have hooked you up....
sorry to hear about the ebay lip. try returning it then get one from one of the two trusted forum vendors.
sorry to hear about the ebay lip. try returning it then get one from one of the two trusted forum vendors.
#8
Contributors
Join Date: Dec 2008
Location: OC, Ca. - aber immer in Deutschland
Posts: 396
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by dbae1978' post='813370' date='Mar 10 2009, 10:41 PM
you should have contacted john@eurorev or nerwyll from trinity autosports. they would have hooked you up....
sorry to hear about the ebay lip. try returning it then get one from one of the two trusted forum vendors.
sorry to hear about the ebay lip. try returning it then get one from one of the two trusted forum vendors.
+1
Trinity sold me one and fitment/paint - 100% perfect the first time.
#9
Senior Members
Join Date: Sep 2008
Location: Cambridge, Ontario [CANADA]
Posts: 370
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2005 545i | Titanium Silver | Sport, Premium, Cold Weather, Navigation packages | Style 124 staggered rims | iPod integration | Tinted windows
Originally Posted by iCharles' post='813852' date='Mar 11 2009, 03:30 PM
+1
Trinity sold me one and fitment/paint - 100% perfect the first time.
Trinity sold me one and fitment/paint - 100% perfect the first time.
#10
Former Vendor
Join Date: Oct 2006
Location: Anaheim, CA
Posts: 19,460
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: F13 M6
Originally Posted by Silver_545i' post='813857' date='Mar 11 2009, 12:37 PM
Hey Nerwyll, should I consider this lip instead of the m-tech bumper if it's easier to install? Can you paint it also? How's the look compared to the m-tech?
although we dont offer the hamann add on for the preLCI front OEM bumper as a replica, but we can get the authentic one. the replica add on front we have is the ACS style.