Introducing the ALUFELGEN 19" CS7 (CSL Reps) for the E60 5-Series&
08-11-2010, 06:26 PM
#1
Contributors
Thread Starter
Join Date: May 2010
Location: Miami, FL
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
AluFelgen Company is pleased to offer our CSL wheels to the 5-Series crowd!
Replica wheel manufacturers have a tendency to manufacture a wheel for all the applications. You can clearly see the same wheel profile regarding of the wheel width Not in our case. We will manufacture the wheels profile and offset specifically for your vehicle to prevent the typical ?replica? wheel look created when wrong offsets are used. We also manufacture wheels 99% in appearance to the original
Our wheels are manufactured with the highest quality casting method as oppose to most replica wheels manufacturers who prefer to use a cheaper casting method, Gravity casting, that creates easily bent and hard to balance wheels. Our cast wheels are made by Low Pressure casting which is the same used by Ronal to manufacture all BMW OEM wheels. All wheels are also clearcoated for better appearance. All our setups would be staggered as well.
We decided to introduce our company with a proper CSL replica wheel simply because the market does not offer it yet. The are two current CSL offerings and on one the spoke thickness is clearly narrower than the original CSL design and the other one lacks the concavity of the CSL, both giving you the typical replica look instead of the OEM look you are trying to achieve.
Retail is set at $999 and $99 SHIPPING.
Wheels are Front 19x8.5 ET + 20mm and Rear 19x9.5 ET + 20mm.
Front Wheel Weight: 25.4lb, Rear Wheel Weight: 26.2lbs
Here are some of our studio shots:
Looking forward to your opinion!
At your service,
Matt.
Replica wheel manufacturers have a tendency to manufacture a wheel for all the applications. You can clearly see the same wheel profile regarding of the wheel width Not in our case. We will manufacture the wheels profile and offset specifically for your vehicle to prevent the typical ?replica? wheel look created when wrong offsets are used. We also manufacture wheels 99% in appearance to the original
Our wheels are manufactured with the highest quality casting method as oppose to most replica wheels manufacturers who prefer to use a cheaper casting method, Gravity casting, that creates easily bent and hard to balance wheels. Our cast wheels are made by Low Pressure casting which is the same used by Ronal to manufacture all BMW OEM wheels. All wheels are also clearcoated for better appearance. All our setups would be staggered as well.
We decided to introduce our company with a proper CSL replica wheel simply because the market does not offer it yet. The are two current CSL offerings and on one the spoke thickness is clearly narrower than the original CSL design and the other one lacks the concavity of the CSL, both giving you the typical replica look instead of the OEM look you are trying to achieve.
Retail is set at $999 and $99 SHIPPING.
Wheels are Front 19x8.5 ET + 20mm and Rear 19x9.5 ET + 20mm.
Front Wheel Weight: 25.4lb, Rear Wheel Weight: 26.2lbs
Here are some of our studio shots:
Looking forward to your opinion!
At your service,
Matt.
08-11-2010, 07:29 PM
#3
Contributors
Join Date: Jul 2008
Location: Chicago
Posts: 4,410
Likes: 0
Received 0 Likes
on
0 Posts
08-11-2010, 07:34 PM
#4
Super Moderator
Join Date: Jan 2008
Location: So. Cal (SFV)
Posts: 17,508
Likes: 0
Received 3 Likes
on
3 Posts
My Ride: 2011.5 Alpine White E90 M3 | Black Novillo Leather | Carbon Fiber Leather Trim | ZCP | ZP2 | M-DCT | Navigation | Moonroof | 6FL Mods: TMS 12.5mm spacers all around l Hawk HPS Brake Pads l OEM M3 Edition Grills l Paint Matched Side Gills l Key Hole D
funny, this isn't the vendor classified section....
08-18-2010, 08:56 AM
#5
Contributors
Thread Starter
Join Date: May 2010
Location: Miami, FL
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
01-07-2011, 08:26 PM
#9
Senior Members
Join Date: Jun 2008
Location: Chino Hills
Posts: 1,017
Likes: 0
Received 2 Likes
on
2 Posts
My Ride: 545I SMG
I think there is definitely more demand for a 20" CSL than a 19". Hell VMR has had 19" for quite some time, even 10" width for more concavity! Being a marketing manager myself it seems there wasn't much research done on the demands of the E60 crowd as it is very clear that everyone here would love to see a 20" CSL rep, including myself 
01-08-2011, 04:33 AM
#10
Senior Members
Join Date: Jul 2009
Location: S. Fla
Posts: 1,129
Likes: 0
Received 0 Likes
on
0 Posts
I think there is definitely more demand for a 20" CSL than a 19". Hell VMR has had 19" for quite some time, even 10" width for more concavity! Being a marketing manager myself it seems there wasn't much research done on the demands of the E60 crowd as it is very clear that everyone here would love to see a 20" CSL rep, including myself
Thread
Thread Starter
Forum
Replies
Last Post
srogers535x
E60, E61 Parts, Accessories and Mods
14
04-26-2015 09:39 AM