E61 535d Paddle shift mod.
#11
Senior Members
Join Date: May 2009
Location: UK
Posts: 817
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: E60 530d
![Default](https://5series.net/forums/images/icons/icon1.gif)
sorry I didn't know where to look in wds for the diagram.
okay, easiest way to check with multimeter - find some spare wire, strip it, insert into the connector, put multimeter on continuity test and one of them should change resistance when the paddle is depressed. Do this for all combinations and write them down and you should figure out what does what and what needs to be swapped around.
Do you have M5 paddles? I don't know if theres a difference between that and the non M car paddles, but you might have a lit up + and - sign so the cable could be for that light.
okay, easiest way to check with multimeter - find some spare wire, strip it, insert into the connector, put multimeter on continuity test and one of them should change resistance when the paddle is depressed. Do this for all combinations and write them down and you should figure out what does what and what needs to be swapped around.
Do you have M5 paddles? I don't know if theres a difference between that and the non M car paddles, but you might have a lit up + and - sign so the cable could be for that light.
#12
New Members
Thread Starter
Join Date: Jun 2014
Location: York
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: BMW 535d Touring
![Default](https://5series.net/forums/images/icons/icon1.gif)
sorry I didn't know where to look in wds for the diagram.
okay, easiest way to check with multimeter - find some spare wire, strip it, insert into the connector, put multimeter on continuity test and one of them should change resistance when the paddle is depressed. Do this for all combinations and write them down and you should figure out what does what and what needs to be swapped around.
Do you have M5 paddles? I don't know if there's a difference between that and the non M car paddles, but you might have a lit up + and - sign so the cable could be for that light.
okay, easiest way to check with multimeter - find some spare wire, strip it, insert into the connector, put multimeter on continuity test and one of them should change resistance when the paddle is depressed. Do this for all combinations and write them down and you should figure out what does what and what needs to be swapped around.
Do you have M5 paddles? I don't know if there's a difference between that and the non M car paddles, but you might have a lit up + and - sign so the cable could be for that light.
Car is back together now and I'd rather not keep taking off airbag if I can help it.
Still cannot find the drawing I am after. I'm trying to find the actual connector plug on a drawing somewhere.
I haven't got M5 paddles, the pull push type, no lights.
Perhaps I need to try a different approach,
#13
New Members
Thread Starter
Join Date: Jun 2014
Location: York
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: BMW 535d Touring
![Default](https://5series.net/forums/images/icons/icon1.gif)
Hi there
Car is back together now and I'd rather not keep taking off airbag if I can help it.
Still cannot find the drawing I am after. I'm trying to find the actual connector plug on a drawing somewhere.
I haven't got M5 paddles, the pull push type, no lights.
Perhaps I need to try a different approach,
Car is back together now and I'd rather not keep taking off airbag if I can help it.
Still cannot find the drawing I am after. I'm trying to find the actual connector plug on a drawing somewhere.
I haven't got M5 paddles, the pull push type, no lights.
Perhaps I need to try a different approach,
Thanks.
#14
New Members
Thread Starter
Join Date: Jun 2014
Location: York
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: BMW 535d Touring
![Default](https://5series.net/forums/images/icons/icon1.gif)
Well all sorted now. Much more logical now.
Left now pulls to go down, pushes to go up. The opposite to the right hand side.
All I did was simply swap the blue and white and blue and black wires around. Unclip the pin retainer, push the pin tangs down and pull out. Twenty minute job including some time with a spare plug and two wires with a multi meter checking how switch works.
Left now pulls to go down, pushes to go up. The opposite to the right hand side.
All I did was simply swap the blue and white and blue and black wires around. Unclip the pin retainer, push the pin tangs down and pull out. Twenty minute job including some time with a spare plug and two wires with a multi meter checking how switch works.
#15
Probation Members
Join Date: May 2020
Location: tamworth
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 635 E63
![Default](https://5series.net/forums/images/icons/icon1.gif)
Hi mate,
thanks for this update. I’ve been searching high and low to determine what this 4 wire set up was. I’ve got a 635D and am seeking to do similar. Did you actually ever confirm what the wires were and there function. Obviously I will simply try what you did but curious as the 4th wire?
many thanks
thanks for this update. I’ve been searching high and low to determine what this 4 wire set up was. I’ve got a 635D and am seeking to do similar. Did you actually ever confirm what the wires were and there function. Obviously I will simply try what you did but curious as the 4th wire?
many thanks
Well all sorted now. Much more logical now.
Left now pulls to go down, pushes to go up. The opposite to the right hand side.
All I did was simply swap the blue and white and blue and black wires around. Unclip the pin retainer, push the pin tangs down and pull out. Twenty minute job including some time with a spare plug and two wires with a multi meter checking how switch works.
Left now pulls to go down, pushes to go up. The opposite to the right hand side.
All I did was simply swap the blue and white and blue and black wires around. Unclip the pin retainer, push the pin tangs down and pull out. Twenty minute job including some time with a spare plug and two wires with a multi meter checking how switch works.
Thread
Thread Starter
Forum
Replies
Last Post
itiswhatitis
DIY: Do It Yourself
9
07-27-2009 09:48 PM