Auto folding mirros SA code
09-25-2009, 12:47 PM
#1
Senior Members
Thread Starter
Join Date: Oct 2007
Location: Denmark
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: BMW e60 525IA 12/2003
Hi All 
Have just mounted the Auto-fold sidewiew mirrows , now I have to get them coded , but I can't finde the SA code anywhere , do one of your guy's know ?
if so please tell
I have read Nigxdoorf's tread , and it seems he have used somekind of a SAM unit/modul instead to handle this folding funtion without coding the car , could anybody perhaps point me in the direction where to get this SAM-unit/modul ( in Europa ), have tryed looking on the German E-bay ( as Nigxdoorf mentioned in his thread ) , but not been able to find something like that.
Thanks for any help
Have just mounted the Auto-fold sidewiew mirrows , now I have to get them coded , but I can't finde the SA code anywhere , do one of your guy's know ?
if so please tell I have read Nigxdoorf's tread , and it seems he have used somekind of a SAM unit/modul instead to handle this folding funtion without coding the car , could anybody perhaps point me in the direction where to get this SAM-unit/modul ( in Europa ), have tryed looking on the German E-bay ( as Nigxdoorf mentioned in his thread ) , but not been able to find something like that.
Thanks for any help
09-25-2009, 01:14 PM
#2
Contributors
Join Date: Jun 2005
Location: Chalandri/Athina/Hellas
Posts: 2,799
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by BenAnd' post='1017014' date='Sep 25 2009, 11:47 PM
Hi All
Have just mounted the Auto-fold sidewiew mirrows , now I have to get them coded , but I can't finde the SA code anywhere , do one of your guy's know ? if so please tell
I have read Nigxdoorf's tread , and it seems he have used somekind of a SAM unit/modul instead to handle this folding funtion without coding the car , could anybody perhaps point me in the direction where to get this SAM-unit/modul ( in Europa ), have tryed looking on the German E-bay ( as Nigxdoorf mentioned in his thread ) , but not been able to find something like that.
Thanks for any help
Have just mounted the Auto-fold sidewiew mirrows , now I have to get them coded , but I can't finde the SA code anywhere , do one of your guy's know ?
if so please tell I have read Nigxdoorf's tread , and it seems he have used somekind of a SAM unit/modul instead to handle this folding funtion without coding the car , could anybody perhaps point me in the direction where to get this SAM-unit/modul ( in Europa ), have tryed looking on the German E-bay ( as Nigxdoorf mentioned in his thread ) , but not been able to find something like that.
Thanks for any help
http://www.realoem.com/bmw/showparts.do?mo...=10&lang=en ...which none of them on the list is valid for "US" specs cars.
and its switch
http://www.realoem.com/bmw/showparts.do?mo...=35&lang=en
09-26-2009, 12:00 AM
#3
Senior Members
Thread Starter
Join Date: Oct 2007
Location: Denmark
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: BMW e60 525IA 12/2003
Originally Posted by nicke60gre' post='1017061' date='Sep 25 2009, 11:14 PM
SA 430
http://www.realoem.com/bmw/showparts.do?mo...=10&lang=en ...which none of them on the list is valid for "US" specs cars.
and its switch
http://www.realoem.com/bmw/showparts.do?mo...=35&lang=en
http://www.realoem.com/bmw/showparts.do?mo...=10&lang=en ...which none of them on the list is valid for "US" specs cars.
and its switch
http://www.realoem.com/bmw/showparts.do?mo...=35&lang=en
Thanks a lot man , just what I needed , hope I can help you some day
Kind Regards
BenAnd
09-26-2009, 03:58 AM
#6
Senior Members
Thread Starter
Join Date: Oct 2007
Location: Denmark
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: BMW e60 525IA 12/2003
Hi Nicke60gre
Have just performed the coding ( with the BMW INPA ) , did start adding the SA430 code to the CAS and LM moduls ( made a FA write ) , after that I coded the door moduls ( left & right ) , and see , it WORKS
So once again THANKS for the code.
Also a great THANKS to my friend here in Denmark that helped me performe the coding ( over the phone told me how to do it in the INPA program )
Have just performed the coding ( with the BMW INPA ) , did start adding the SA430 code to the CAS and LM moduls ( made a FA write ) , after that I coded the door moduls ( left & right ) , and see , it WORKS
So once again THANKS for the code.
Also a great THANKS to my friend here in Denmark that helped me performe the coding ( over the phone told me how to do it in the INPA program )
09-26-2009, 09:20 PM
#7
Contributors
Join Date: Mar 2007
Location: San Francisco, CA
Posts: 919
Likes: 0
Received 1 Like
on
1 Post
My Ride: 2005 545i Black Sapphire - Fully Loaded
Model Year: 545i 2005
And another retrofit 
Good job ben! What's going to happen when you finish doing all the retrofits ? 
Good job ben! What's going to happen when you finish doing all the retrofits ?
09-27-2009, 12:12 AM
#8
Contributors
Join Date: Jun 2005
Location: Chalandri/Athina/Hellas
Posts: 2,799
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by BenAnd' post='1017540' date='Sep 26 2009, 02:58 PM
Hi Nicke60gre
Have just performed the coding ( with the BMW INPA ) , did start adding the SA430 code to the CAS and LM moduls ( made a FA write ) , after that I coded the door moduls ( left & right ) , and see , it WORKS
So once again THANKS for the code.
Also a great THANKS to my friend here in Denmark that helped me performe the coding ( over the phone told me how to do it in the INPA program )
Have just performed the coding ( with the BMW INPA ) , did start adding the SA430 code to the CAS and LM moduls ( made a FA write ) , after that I coded the door moduls ( left & right ) , and see , it WORKS
So once again THANKS for the code.
Also a great THANKS to my friend here in Denmark that helped me performe the coding ( over the phone told me how to do it in the INPA program )
I know how you feel with this kind of mods. It's wonderful feeling to see that a function that officially can't be retrofitted ...it can! Makes you 
09-30-2009, 07:20 AM
#9
Members
Join Date: Dec 2007
Location: Finland, Oulu
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BenAnd' post='1017540' date='Sep 26 2009, 01:58 PM
Hi Nicke60gre
Have just performed the coding ( with the BMW INPA ) , did start adding the SA430 code to the CAS and LM moduls ( made a FA write ) , after that I coded the door moduls ( left & right ) , and see , it WORKS
So once again THANKS for the code.
Also a great THANKS to my friend here in Denmark that helped me performe the coding ( over the phone told me how to do it in the INPA program )
Have just performed the coding ( with the BMW INPA ) , did start adding the SA430 code to the CAS and LM moduls ( made a FA write ) , after that I coded the door moduls ( left & right ) , and see , it WORKS
So once again THANKS for the code.
Also a great THANKS to my friend here in Denmark that helped me performe the coding ( over the phone told me how to do it in the INPA program )
09-30-2009, 07:40 AM
#10
Senior Members
Join Date: May 2009
Location: New York
Posts: 397
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BenAnd' post='1017014' date='Sep 25 2009, 04:47 PM
Hi All
Have just mounted the Auto-fold sidewiew mirrows , now I have to get them coded , but I can't finde the SA code anywhere , do one of your guy's know ? if so please tell
I have read Nigxdoorf's tread , and it seems he have used somekind of a SAM unit/modul instead to handle this folding funtion without coding the car , could anybody perhaps point me in the direction where to get this SAM-unit/modul ( in Europa ), have tryed looking on the German E-bay ( as Nigxdoorf mentioned in his thread ) , but not been able to find something like that.
Thanks for any help
Have just mounted the Auto-fold sidewiew mirrows , now I have to get them coded , but I can't finde the SA code anywhere , do one of your guy's know ?
if so please tell I have read Nigxdoorf's tread , and it seems he have used somekind of a SAM unit/modul instead to handle this folding funtion without coding the car , could anybody perhaps point me in the direction where to get this SAM-unit/modul ( in Europa ), have tryed looking on the German E-bay ( as Nigxdoorf mentioned in his thread ) , but not been able to find something like that.
Thanks for any help
hey BenAnd,
is there a DIY for this... if not can you post something up... looking forward to doing this in the near future... thanks man
also is the coding different if you use the GT1 software from BMW
Thread
Thread Starter
Forum
Replies
Last Post
Stormcrow
E60, E61 Parts, Accessories and Mods
8
12-01-2019 02:09 AM
stillak
E60, E61 Parts, Accessories and Mods
9
06-15-2015 09:51 AM