530i Audio Build Log
10-27-2010, 08:55 AM
#1
Contributors
Thread Starter
Join Date: Jan 2007
Location: Orlando, FL
Posts: 1,615
Likes: 0
Received 3 Likes
on
3 Posts
My Ride: 2005 530i Silver Gray/ Gray Leather. SP,PP
Before i start this audio build log i would like to first thank Don Amann of Unexpected Creations/Exquisite Marketing http://www.exquisitemarketinggroup.com/ and my installer Russ Balazs of Octave http://www.facebook.com/pages/Octave/387239853904 for the being patient with me during the past 2 months while i made changes on a daily basis on how i want to take my car audio obsession to next level.
For those that havent seen my first install here's the thread. https://5series.net/forums/topic/422..._1#entry445524,
After having my current audio system for 3 years and numerous changes since it was done i decided it was time for an upgrade and start all over from scratch. I was happy with my Rainbow Plats 2 way active set but always want it to run a 3 way set. After going back and forth for days between the Audison Thesis and Dynaudio Esotar2 speakers i went with the Esotar2. Choosing which amp i wanted it to run was a easier decision, I went with 2 Tru Technology 4100 w/ Stage 4 mods 4 channel amps with plexi bottoms. I know for a lot of guys might consider this install overkill but i want it to have the latest and greatest, no expense spared. I am keeping the car for at least another 2 years so i want it this to be the best and last install in this car, Car audio is not cheap
On to goals and expectations of this project/build-
Great SQ,Use as much Alcantara as possible Run single 12" sub in an IB enclosure, Redo door pods to make them look more OEM, utilize the MS-8 logic7 system to its full potential by adding a center channel, fabricate kicks for midrange and tweets and to build a simple and clean looking trunk with a purpose that is both stealthy and fit for daily usage. Another goal was to make the system show ready since this car will be showcase at local meets and will be a demo car for potential clients.
Here's a couple of pics of the Dyanudio Esotar2 drivers. Sorry for the crappy phone pics.
650s
430s
110s
For those that havent seen my first install here's the thread. https://5series.net/forums/topic/422..._1#entry445524,
After having my current audio system for 3 years and numerous changes since it was done i decided it was time for an upgrade and start all over from scratch. I was happy with my Rainbow Plats 2 way active set but always want it to run a 3 way set. After going back and forth for days between the Audison Thesis and Dynaudio Esotar2 speakers i went with the Esotar2. Choosing which amp i wanted it to run was a easier decision, I went with 2 Tru Technology 4100 w/ Stage 4 mods 4 channel amps with plexi bottoms. I know for a lot of guys might consider this install overkill but i want it to have the latest and greatest, no expense spared. I am keeping the car for at least another 2 years so i want it this to be the best and last install in this car, Car audio is not cheap
On to goals and expectations of this project/build-
Great SQ,Use as much Alcantara as possible
Run single 12" sub in an IB enclosure, Redo door pods to make them look more OEM, utilize the MS-8 logic7 system to its full potential by adding a center channel, fabricate kicks for midrange and tweets and to build a simple and clean looking trunk with a purpose that is both stealthy and fit for daily usage. Another goal was to make the system show ready since this car will be showcase at local meets and will be a demo car for potential clients.Here's a couple of pics of the Dyanudio Esotar2 drivers. Sorry for the crappy phone pics.
650s
430s
110s
10-27-2010, 08:57 AM
#2
Contributors
Thread Starter
Join Date: Jan 2007
Location: Orlando, FL
Posts: 1,615
Likes: 0
Received 3 Likes
on
3 Posts
My Ride: 2005 530i Silver Gray/ Gray Leather. SP,PP
Stage 1:
The first thing i want to do before even upgrading the system was fitting the car with an Alcantara headliner.. I saw a couple of other local BMWs that Russ worked and was very impress of the change and vibe the alcantara headliner made, so this was a no brainer for me.
The first thing i want to do before even upgrading the system was fitting the car with an Alcantara headliner.. I saw a couple of other local BMWs that Russ worked and was very impress of the change and vibe the alcantara headliner made, so this was a no brainer for me.
10-27-2010, 08:58 AM
#3
Contributors
Thread Starter
Join Date: Jan 2007
Location: Orlando, FL
Posts: 1,615
Likes: 0
Received 3 Likes
on
3 Posts
My Ride: 2005 530i Silver Gray/ Gray Leather. SP,PP
Stage 2:
The door pods were next. I wanted to redoing them because the original were sticking out too much and didn't like the fact that they were not color match.
The door pods were next. I wanted to redoing them because the original were sticking out too much and didn't like the fact that they were not color match.
10-27-2010, 08:59 AM
#5
Contributors
Thread Starter
Join Date: Jan 2007
Location: Orlando, FL
Posts: 1,615
Likes: 0
Received 3 Likes
on
3 Posts
My Ride: 2005 530i Silver Gray/ Gray Leather. SP,PP
Talk about perfection
Stage 3:
Micro Precison 5.8 wideband driver for center channel duties
Russ is currently working on the kicks, should have an update sometime next week.
Stage 3:
Micro Precison 5.8 wideband driver for center channel duties
Russ is currently working on the kicks, should have an update sometime next week.
10-27-2010, 11:18 AM
#6
Contributors
Join Date: Oct 2008
Location: Elizabeth, NJ
Posts: 766
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2006 530xi (Titanium Grey/ Black interior) Debaged, L.e.d. light upgrade throughout. ACS roof spoiler. H&R sport sprigs, Angel eye upgrade, euro sticker, ,matte black grills.
Nice! Are those custom panels or aftermarket speaker panels?
