WinKFP Problem. Please help.
 

Hello friends, I have problem with winkfp, I try to flash MOSTGW but it stuck, in comfort mode when i choose my zusb 9185627 MOSTGW, it give me Hardware number 9185626 and Assembly identification number 9185627. I try in expert mode but nothing, i try to update but again nothing. Please for some help, now ccc is not working and motor spin all the time.

https://cimg9.ibsrv.net/gimg/5series...19d2877336.jpg
https://cimg1.ibsrv.net/gimg/5series...05a956b8fc.jpg

I'm quite sure you need Icom and ISTA/P for this procedure as the FIBRE connector musy be present to programme the ECU

All is fine now, I always using ICOM A and Icom B, my mistake was that I not use Icom B most to flash CCC or most gw and they both stuck. Now everything is fine. But again I can't start IstaP it give me always error 94025

Still using ISTA loader?

Yes i try with V6.3 and V6.6 but the problem is still the same. And there is some car retrofits and one guy say it is possible because the car is retrofitted

I'd reinstall Ediabas Patched 7.3 and reinstall ISTAP if necessary and retry