Steering wheel roundel
Thread Starter
Senior Members
Joined: Aug 2010
Posts: 948
Likes: 0
From: Ct
My Ride: 04' 545i, Sport Package, Black, Active Xenon, ARS, Aux Input
'10 Tahoe, Black on Black, leather, Nav/XM, 20" tires, full body kit, power 2nd row, loaded
'93 Jeep Wrangler, lifted 4.5", 33" meats, Rampage Recovery Bumper w/Tire Swing, etc
25' Aquasport Osprey, Center Console,2012 200 HO Etec
The PO of my 545i must have gotten pissed off and slammed the emblem in the center of my steering wheel and its dented in 2 spots. I was thinking of getting black and white roundels all around. I know how they are replaced all around except for the steering wheel... I am afraid its not on grommets and will affect the airbag??? Thoughts? Anyone do this on this particular model?
Senior Members
Joined: Jul 2010
Posts: 942
Likes: 0
From: Chattanooga, TN
My Ride: 08 528I Sport/Prem
You cannot replace the emblem on the steering wheel. It is binded to the airbag cover. You will damage the steering wheel and destroy the emblem trying to pry it off.
I recommend an overlay. I have the carbon fiber one and its made of hard aluminum. You just apply the emblem on top of the stock one
I recommend an overlay. I have the carbon fiber one and its made of hard aluminum. You just apply the emblem on top of the stock one
Contributors
Joined: Mar 2008
Posts: 5,073
Likes: 0
From: new york
My Ride: 2011, E90 M3 Sedan. Alpine White.Competition package, Keyhole cover, fender reflectors in Alpine white, RPI Exhaust, 19
our probably pretty much "fuc$%^".. what he said, I dont think you can change it without s major issue, your better off getting overlays and making the best out of it 
Thread Starter
Senior Members
Joined: Aug 2010
Posts: 948
Likes: 0
From: Ct
My Ride: 04' 545i, Sport Package, Black, Active Xenon, ARS, Aux Input
'10 Tahoe, Black on Black, leather, Nav/XM, 20" tires, full body kit, power 2nd row, loaded
'93 Jeep Wrangler, lifted 4.5", 33" meats, Rampage Recovery Bumper w/Tire Swing, etc
25' Aquasport Osprey, Center Console,2012 200 HO Etec
You cannot replace the emblem on the steering wheel. It is binded to the airbag cover. You will damage the steering wheel and destroy the emblem trying to pry it off.I recommend an overlay. I have the carbon fiber one and its made of hard aluminum. You just apply the emblem on top of the stock one
@$%&!!!!!! Thats what I was afraid of... so because this PO was a dipsh&% I get to stare at a dented emblem...what a tool!
Thread Starter
Senior Members
Joined: Aug 2010
Posts: 948
Likes: 0
From: Ct
My Ride: 04' 545i, Sport Package, Black, Active Xenon, ARS, Aux Input
'10 Tahoe, Black on Black, leather, Nav/XM, 20" tires, full body kit, power 2nd row, loaded
'93 Jeep Wrangler, lifted 4.5", 33" meats, Rampage Recovery Bumper w/Tire Swing, etc
25' Aquasport Osprey, Center Console,2012 200 HO Etec
Contributors
Joined: Mar 2008
Posts: 573
Likes: 0
From: Ocean Springs, MS
My Ride: 2007 Sapphire Black Metallic 525i. Beige Dakota Leather, Premium package, bluetooth, BMW Assist, Xenon adaptive lights, Sirius radio
Could a pop a dent guy pull it back out with suction?
Thread Starter
Senior Members
Joined: Aug 2010
Posts: 948
Likes: 0
From: Ct
My Ride: 04' 545i, Sport Package, Black, Active Xenon, ARS, Aux Input
'10 Tahoe, Black on Black, leather, Nav/XM, 20" tires, full body kit, power 2nd row, loaded
'93 Jeep Wrangler, lifted 4.5", 33" meats, Rampage Recovery Bumper w/Tire Swing, etc
25' Aquasport Osprey, Center Console,2012 200 HO Etec
I am hoping the new black and white will sit flush and have enough to adhere to. Not sure how rigid it is. Just dont want the new one to dent the same way since it sits on top of the old.
Thread
Thread Starter
Forum
Replies
Last Post
TexaZ3
Complete Car Sales
17
May 6, 2015 09:54 AM
