Mtec Bumper upgrade
Contributors
Joined: Apr 2007
Posts: 5,851
Likes: 5
From: Kajaani, Finland
My Ride: Bmw 530d 2004
guys excuse my ignorance, still learning this car
do i need all these parts?
51117033705 support side panel 9.02
51117033706 support side panel 9.02
51117896587 front brake air duct 27.00
51117896588 front brake air duct 27.00
51117896603 cover fog light 14.50
51117896604 cover fog light 14.50
51117063835 support ledge 11.20
51117896586 grid center 55.10
51117897186 grid left 27.55
51117897184 grid right 27.55
51117896591 shock absorber M 25.84
51117896592 shock absorber M 25.84
Total 274.12
do i need all these parts?
51117033705 support side panel 9.02
51117033706 support side panel 9.02
51117896587 front brake air duct 27.00
51117896588 front brake air duct 27.00
51117896603 cover fog light 14.50
51117896604 cover fog light 14.50
51117063835 support ledge 11.20
51117896586 grid center 55.10
51117897186 grid left 27.55
51117897184 grid right 27.55
51117896591 shock absorber M 25.84
51117896592 shock absorber M 25.84
Total 274.12
You will need the parts on the page 3 of the installation guide and the parts AU, AV, AW, AX and AY on page 5.
Print it out, go to your dealer and they'll find the right part numbers and parts for you. Depending on what car you have, there is some differencies in part numbers. For example parts AV and AX depend on the motor you have.
- Antti -
Members
Joined: Mar 2010
Posts: 26
Likes: 0
From: glendale ca
My Ride: 2007 BMW 530i alpine white......have 550 body kit, ac spoilers, 20 inch m5 replica rims, BOSH horns, dark tint....will add xenon fogs and paint the grill titanium silver =]
hi guys, i am planning on doing the Mtec bumper upgrade, and so far i only have the bare bumper..thats it
people who have done this upgrade, what other parts do we need?
Just by looking at pic i see i need these two plastic pieces, one on each end.
Center Grille
Fog light housing
.,.........but what else?
thank you in advance
people who have done this upgrade, what other parts do we need?
Just by looking at pic i see i need these two plastic pieces, one on each end.
Center Grille
Fog light housing
.,.........but what else?
thank you in advance
Thread Starter
Senior Members
Joined: Jul 2010
Posts: 943
Likes: 0
From: san francisco
My Ride: BMW E-60 530I
i just had mine installed the bare front back bumpers cost me 500 and with everything with paint total was about 1000. so for front you will only need center grill, the grits for the center grill, fog lights brackets (your e60 fogs will fit, the air ducts, the tow cap and the headlight washing caps. for the back you will only need the diffuser and the tow cap and a professional has to make some adjustments on the bottom of the bumper like cutting plastics so the air wont penetrate under the bumper when you drive on the freeway. people say you also need to trim or shave the fender liners, but no need to they fit perfectly. this upgrade for me took almost 2 months because without knowing what to expect and the parts that i needed it was just a major headache..so know what your doing before you get into this. =] heres my results
bro i dont know u but i sure love you!!!!, so i cant use my 530i bumpers headlight washing caps? and to
Thread
Thread Starter
Forum
Replies
Last Post
socale39
Complete Car Sales
9
Sep 5, 2023 08:30 AM
chadillac2000
E60, E61 Parts, Accessories and Mods
42
Sep 13, 2017 11:15 AM