LCI Tail light mod
06-30-2010 | 07:29 PM
#1
Thread Starter
Members
Joined: Apr 2010
Posts: 55
Likes: 0
From: Southern California
My Ride: 2007 530i. RPI Scoop, BMC Filter, 17 light LED upgrade. blacked out roundels on trunk, hood, steering wheel, rims. 6000k HID bulbs and 6000k HID fogs. MTEC V2.1 AE's. Euro stickers
Hey guys. I need some Bimmer Guru help. I gotta '07 530i and my boy has an '08 528i. hes selling his car and agreed to swap tail lights so I can have the LCI's in my car. I know I can install his 08 LCI with the V6 Bruce cables. But can he put my 07 tail lights in his 2008?? like a straight swap??? thanks alot everyone
06-30-2010 | 08:51 PM
#3
Banned
Joined: Jun 2008
Posts: 7,983
Likes: 1
From: Queens, NY
My Ride: A Car
Stop lying to him Ryan!! It can be possible!!!
Buy the BMW retrofit cables.
Swap the following: Light Control Module, headlights, taillights, the two adaptive headlight modules
Rewire BOTH cars the headlights and taillights. For the 2007 E60, wire it exactly like the BMW LCI retrofit instructions. For the 2008 E60, reverse ALL the wiring. When cutting the pre-LCI wires, cut it with a little more length since you will need to solder the wires back ONTO the LCI vehicle.
This should take you at least 10 hours to finish and parts should cost about $40. THere should be no need for programming since it's all in the LCM. Good luck!!!
06-30-2010 | 10:59 PM
#4
Senior Members
Joined: Jul 2008
Posts: 3,652
Likes: 0
My Ride: 2006 BMW 550i
Stop lying to him Ryan!! It can be possible!!!
Buy the BMW retrofit cables.
Swap the following: Light Control Module, headlights, taillights, the two adaptive headlight modules
Rewire BOTH cars the headlights and taillights. For the 2007 E60, wire it exactly like the BMW LCI retrofit instructions. For the 2008 E60, reverse ALL the wiring. When cutting the pre-LCI wires, cut it with a little more length since you will need to solder the wires back ONTO the LCI vehicle.
This should take you at least 10 hours to finish and parts should cost about $40. THere should be no need for programming since it's all in the LCM. Good luck!!!
Buy the BMW retrofit cables.
Swap the following: Light Control Module, headlights, taillights, the two adaptive headlight modules
Rewire BOTH cars the headlights and taillights. For the 2007 E60, wire it exactly like the BMW LCI retrofit instructions. For the 2008 E60, reverse ALL the wiring. When cutting the pre-LCI wires, cut it with a little more length since you will need to solder the wires back ONTO the LCI vehicle.
This should take you at least 10 hours to finish and parts should cost about $40. THere should be no need for programming since it's all in the LCM. Good luck!!!
07-01-2010 | 02:13 PM
#7
Senior Members
Joined: Sep 2009
Posts: 932
Likes: 0
From: West LA
My Ride: 2005 BMW 545i
Exactly what I was thinking. If you're buying a car though, you should know this. It takes maybe an hour of research to find this out? Sucks to whoever buys the car though, pre-LCI tails suck compared to LCI ones.
Thread
Thread Starter
Forum
Replies
Last Post
socale39
Complete Car Sales
9
09-05-2023 09:30 AM
rizwan1377
E60 Discussion
2
04-05-2015 06:22 PM
andymax
Private Member Classifieds
0
03-13-2015 11:51 AM