stafli

I beleive errors described below aren't relevant in the U.S.

#1 I have a number of preset RDS-channels on my radio pro (let's call them C1, C2, C3, Cn...). Sometimes when I start, the channel in use is C3. After a while I hear this static noise (as described in other posts). I then press the "+" button on my steering wheel to go to next channel (C4). It takes 3-5 seconds (a not expected delay), then the radio "throws" me to C1 or any used/unused frequency.... After that small disfunction, i can step normally back to C3 and the noise is gone and everything seems to be working as intended. Not a fatal error, but irritating (Yes, I have CIP 18.1 sw).

#2 After parking in an underground garage with C3 (a local channel w/ RDS but no traffic information) set, the radio won't find the traffic information unless i change to C2 (channel where the traffic information is sent from) and then back to C3. After that the traffic info is continously updated as intended. As I understand the radio pro has dual tuners just so that it could collect traffic information even if I'm listening to a "non-info" channel.
When I park in the street or in a above ground garage, this does'nt happen. The bug seems to appear when the radio completely looses signal.

drjochen

At least you have RDS. here in the US, RDS was disabled and supposedly will not come back.....

stafli

It seems I'm the only poor human with this bug! I'll trymy dealer!