Inpa- after adaptations reset
 

Hello everyone,

The car is BMW E60 M54B25, automatic transmission, late 2003 with 161000 km on the clock.

I recentlly had this "quack" noise from car's center (midlle), sometimes only. My car allways had idle @ 650 rpm slightlly rough. Today I made adaption reset to my car. I have to reset all moduls with INPA EDIABAS cable (I have blue one). Car is idleing now @ 800 rpm. slightlly rough also. I have uploaded photos of my screen capture at 5Series.net - Forums - rocky5's Album: INPA if anyone whants to check them to help me find any faults or something out of order. However, inpa did not give me any fault code. After reset I have started car with my cable out and in my i-drive i had instant error of YELLOW TRIANGLE with circle (arrow) telling me that DTC system has a fault "traction control". This yellow triangle with circle (arrow) is constantlly illuminated in my instrument cluster and DTC button does not function anymore. I can drive car normally. But when I touch brakes I can hear this quack. Sometimes it quacks even without me touching anything. I have performed all the process with engine shutdown and when engine was hot. After I took photos while engine on idle also hot.

I am sorry for my spelling\writeing errors.

Can anyone tell me what could be wrong?or any explanation, clue anything at all?