Hud
#11
New Members
![Default](https://5series.net/forums/images/icons/icon1.gif)
I just adjusted mine yesterday.
Try raising the image by adjusting it. There is 2 T10 torx screws holding the Idrive in. It will tip down and out.
Let it dangle and grab about 18 inches of extensions for a 13mm socket and wrench. Loosen it little over 180 degrees then use a 6mm for the tip of the threaded shaft.
About 90 degrees loosen (lefty loosey) should put it in the sweet spot. Loosen it more if it doesn't.
If I would have known the 6mm would get stuck on the shaft I would have used some silicone paste in the socket. I got it out with a long needle nose and some wiggling.
Try raising the image by adjusting it. There is 2 T10 torx screws holding the Idrive in. It will tip down and out.
Let it dangle and grab about 18 inches of extensions for a 13mm socket and wrench. Loosen it little over 180 degrees then use a 6mm for the tip of the threaded shaft.
About 90 degrees loosen (lefty loosey) should put it in the sweet spot. Loosen it more if it doesn't.
If I would have known the 6mm would get stuck on the shaft I would have used some silicone paste in the socket. I got it out with a long needle nose and some wiggling.
#12
New Members
Join Date: Jul 2014
Location: brisbane
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2007 E60 530d
Model Year: 2007
Engine: M57
#13
Senior Members
Join Date: Oct 2009
Location: Indiana, USA
Posts: 1,380
Likes: 0
Received 3 Likes
on
3 Posts
My Ride: 2007 530xi: Sport, NAV, PDC, HUD, Cold Wthr, CA, Logic 7, HD Radio, SAT, Custom NCS coded options 2008 535xi: Sport, Night Vision, NAV, PDC, HUD, Cold Wthr, CA, Logic 7, SAT, Custom NCS coded options, Rear Seat Heat Retrofit, Passport 9500ci
Model Year: 2008
Engine: N54
![Default](https://5series.net/forums/images/icons/icon1.gif)
The thickness of the glass would give a double image in nearly any scenario I think.
Neat wiki article.
Thread
Thread Starter
Forum
Replies
Last Post