Headlight Up/Down feature (Self Leveling) not working
Recently, I noticed that the headlight (xenon) up/down feature (self leveling) during start of the car not seem working. Headlight beam did not go up & down, it just stayed at one level. Any suggestion what to look for ?
Thanks, Ching-Ho Cheng |
does the led form the light switch blink green?
|
Originally Posted by stel_i79
(Post 1599055)
does the led form the light switch blink green?
Thanks. |
Is it supposed to go up/down. Upon startup, mine go from left to right.
|
If it has an issue the light should be blinking. Mine has been blinking for about a year. Troubleshooting has been a headache and I gave up.
If yours is not blinking then it doesn't see an issue with the modules. |
Originally Posted by tstiglich
(Post 1599071)
Is it supposed to go up/down. Upon startup, mine go from left to right.
|
Originally Posted by seanjordan20
(Post 1599076)
If it has an issue the light should be blinking. Mine has been blinking for about a year. Troubleshooting has been a headache and I gave up.
If yours is not blinking then it doesn't see an issue with the modules. Thanks. |
Not sure. But on mine, if I have the headlights "ON" vs "AUTO", they don't steer with the front wheels. Otherwise, they do the up/down when starting, then side-side.
|
The motors or broken guides
|
The system is checking itself when starting. If it sees something wrong it will start flashing on the selector panel
|
I will check the linkage first, thank you.
|
If you have INPA you can test your lights manually. Also it will tell you if anything is wrong
|
Originally Posted by seanjordan20
(Post 1599088)
If you have INPA you can test your lights manually. Also it will tell you if anything is wrong
Thanks. Ching-Ho Cheng |
I can open up INPA and write down instructions. When I did it I just played with it until I got to where I needed.
|
Originally Posted by seanjordan20
(Post 1599090)
I can open up INPA and write down instructions. When I did it I just played with it until I got to where I needed.
Thanks. |
1 Attachment(s)
You will have to go into the E60 menu then click on Body. Once on Body look to the right and you should have a selection for adaptive lift control. Click on it and from there you can test your light up and down left to right.
|
Get it, thank you so much. :)
|
it might be the leveling sensor
|
Do you know how to check sensor ?
Thanks. |
If you have a reader that reads the output you can check it that way or just physically check by looking under you car
|
Originally Posted by Razzy530
it might be the leveling sensor
|
Originally Posted by seanjordan20
(Post 1599158)
Wouldn't the sensor give a green flashing light at the light switch?
Thanks. |
Originally Posted by lcc014
If that is the case then it will be easy to know....
Thanks. |
I see....
|
Originally Posted by seanjordan20
(Post 1599158)
Wouldn't the sensor give a green flashing light at the light switch?
|
Hi, i know this is an old thread, but mine flashing green now. So one of my bulbs were broken and i replaced it, ever since, it doesn't go up and down on start anymore. Any recommendations?
|
Originally Posted by t_mo_t
(Post 1612020)
Hi, i know this is an old thread, but mine flashing green now. So one of my bulbs were broken and i replaced it, ever since, it doesn't go up and down on start anymore. Any recommendations?
|
All times are GMT -8. The time now is 06:36 PM. |
© 2024 MH Sub I, LLC dba Internet Brands