Getting to the radiator drain plug
Thread Starter
New Members
Joined: Dec 2012
Posts: 23
Likes: 0
Getting to the radiator drain plug
What's going Team Bimmer. Hope everybody's vehicle is running ferociously. I'm trying to drain the coolant from the radiator on my 2007 530i. How do I get to the drain plug? Seems to be a panel covering the bottom of the radiator when I looked under the car, and I'm not seeing where I can take that small panel off...thanks for any help...
Senior Members
Joined: Mar 2011
Posts: 1,198
Likes: 3
From: Boston
My Ride: '06 530i, '07 C280 4matic, '98 ML320
On the passenger side end of the radiator there is a petcock valve; you should be able to access that valve after removing the bottom splash shield.
That valve tends to leak after using it to drain coolant. You will need to put new o-ring on that valve before filling up the system with coolant. If I were you, I'd just disconnect the lower radiator hose for draining the coolant.
That valve tends to leak after using it to drain coolant. You will need to put new o-ring on that valve before filling up the system with coolant. If I were you, I'd just disconnect the lower radiator hose for draining the coolant.
Thread
Thread Starter
Forum
Replies
Last Post
Germaniks
E60, E61 Parts, Accessories and Mods
11
Aug 9, 2015 10:46 AM
Bank$hot530
Private Member Classifieds
0
Jul 12, 2015 04:36 PM
