Front Arm Bushings
06-09-2014 | 04:42 AM
#1
Thread Starter
Members
Joined: Jul 2009
Posts: 162
Likes: 0
From: New York
My Ride: 550i Manual Sport
Model Year: 2007
Engine: 4.8 L N62 V8
Front Arm Bushings
My bushings are shot and need replacing. Should i replace with OEM or use other brands that are less expensive? Is there a difference in performance?
06-09-2014 | 08:19 AM
#2
Members
Senior Members
Joined: Oct 2011
Posts: 465
Likes: 1
From: East Coast
My Ride: 04' 545, 6 Spd Manual, Blk Lthr, Sport Pkg, Sport Sts, Logic 7, Cold Wthr Pkg, Full L.E.D. Interior, Red Eng. Cvr, Mtech Front Bmpr, M5 Spoiler, Matte Blk Grill, Red Caps, Slttd & Drlld Rotors, 20
Model Year: 2004
OEM is a little expensive.. LEMFORDER is just as good as OEM but will save you a couple bucs. Some people us MEHLE also.
06-09-2014 | 04:26 PM
#3
New Members
Joined: Oct 2012
Posts: 757
Likes: 13
From: Chestermere AB
My Ride: 535xi
Model Year: 2008
If there were an option for non-fluid type at the expense of a slightly stiffer ride, I'd be open to that. Back in the E34 days, you could put bushes off a 750 if you wanted them slightly stiffer than stock, or M5 if you were a little full-goose-bozo. I liked the way the M5 rode.
Thread
Thread Starter
Forum
Replies
Last Post