DSC module is DEAD!!!
Thread Starter
New Members
Joined: Apr 2022
Posts: 4
Likes: 0
From: germany
My Ride: bmw 525i M54 e60
DSC module is DEAD!!!
Hi. I have a BMW e60 525i 2004
I change DSC module and change VIN. new module is DSCA60, and my car is DSC60.
all things is OK, but some DSC error is for AFS.
I tried change DSC ZB number, in winkfp in expert mode.
According to this post: https://www.car-auto-repair.com/wink...configuration/
but winkfp errro in 100%, 07FLASH.prg.
and MY DSC is DEAD!!
INPA does not know!!
and winkfp error is : IFH-0009: No response from controlunit 07FLASH
ECU does not answer SG_AIF_LESEN
I try with ISTA/P , and reanimate module, but ISTA/P error in program :
Global.VehicleCommiunication.EDIABAS.98 - SYS-0008: job not found; Global.VehicleCommiunication.EDIABAS.19 IFH-0009-ECU not connected or not responding.
I use from K+DKAN cable, Does ICOM help?
Can it be returned?
I change DSC module and change VIN. new module is DSCA60, and my car is DSC60.
all things is OK, but some DSC error is for AFS.
I tried change DSC ZB number, in winkfp in expert mode.
According to this post: https://www.car-auto-repair.com/wink...configuration/
but winkfp errro in 100%, 07FLASH.prg.
and MY DSC is DEAD!!
INPA does not know!!
and winkfp error is : IFH-0009: No response from controlunit 07FLASH
ECU does not answer SG_AIF_LESEN
I try with ISTA/P , and reanimate module, but ISTA/P error in program :
Global.VehicleCommiunication.EDIABAS.98 - SYS-0008: job not found; Global.VehicleCommiunication.EDIABAS.19 IFH-0009-ECU not connected or not responding.
I use from K+DKAN cable, Does ICOM help?
Can it be returned?
Thread
Thread Starter
Forum
Replies
Last Post
mandisa
E60 M5 Discussion
0
May 2, 2008 12:32 PM