Changed plugs and a few other things today. What a difference!
#1
Senior Members
Thread Starter
Join Date: Nov 2009
Location: Warwick, RI
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2005 545i Sport 6MT
I changed out my plugs on my 2005 545i today along with the pressure regulating valves, and the modified clutch delay valve. Its almost like driving a totally different car. It definitely picked up torque in the low end, and some on the top end as well. Engine seems to run much smoother. I'll keep all posted about fuel mileage. I also put in a modified CDV from Zeckhausen Racing and it really does give the clutch a MUCH better feel. However, its an absolute NIGHTMARE bleeding that system without a power bleeder. I had to remove the slave cylinder because there was a huge air pocket that the bleeder was not allowing out. It took me an hour or so all together for the plugs and valves, about a half hour or so for the CDV, and about 2 hours bleeding. LOL. The car has 65k miles on it.
I fix one thing and something is wears out. I noticed that my left inner tie rod end is starting to have some backlash when shaking the wheel. Its not that bad yet but oh well.
I fix one thing and something is wears out. I noticed that my left inner tie rod end is starting to have some backlash when shaking the wheel. Its not that bad yet but oh well.
#2
Contributors
Join Date: Aug 2008
Location: Originally from Koeln, Deutschland. Enjoying it in Bonita Springs, Florida Now :)
Posts: 7,421
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 05545i' post='1077816' date='Dec 21 2009, 07:08 PM
I changed out my plugs on my 2005 545i today along with the pressure regulating valves, and the modified clutch delay valve. Its almost like driving a totally different car. It definitely picked up torque in the low end, and some on the top end as well. Engine seems to run much smoother. I'll keep all posted about fuel mileage. I also put in a modified CDV from Zeckhausen Racing and it really does give the clutch a MUCH better feel. However, its an absolute NIGHTMARE bleeding that system without a power bleeder. I had to remove the slave cylinder because there was a huge air pocket that the bleeder was not allowing out. It took me an hour or so all together for the plugs and valves, about a half hour or so for the CDV, and about 2 hours bleeding. LOL. The car has 65k miles on it.
I fix one thing and something is wears out. I noticed that my left inner tie rod end is starting to have some backlash when shaking the wheel. Its not that bad yet but oh well.
I fix one thing and something is wears out. I noticed that my left inner tie rod end is starting to have some backlash when shaking the wheel. Its not that bad yet but oh well.
#3
Contributors
Join Date: Sep 2006
Location: Hong Kong
Posts: 21,274
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: Mini Cooper
Originally Posted by Krozi' post='1077867' date='Dec 22 2009, 10:18 AM
Sounds good! IMO, the 100k mile spark plug service is pretty ridiculous.
you save more fuel and better power
#4
Contributors
Join Date: Sep 2006
Location: Hong Kong
Posts: 21,274
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: Mini Cooper
Originally Posted by 05545i' post='1077816' date='Dec 22 2009, 08:08 AM
I changed out my plugs on my 2005 545i today along with the pressure regulating valves, and the modified clutch delay valve. Its almost like driving a totally different car. It definitely picked up torque in the low end, and some on the top end as well. Engine seems to run much smoother. I'll keep all posted about fuel mileage. I also put in a modified CDV from Zeckhausen Racing and it really does give the clutch a MUCH better feel. However, its an absolute NIGHTMARE bleeding that system without a power bleeder. I had to remove the slave cylinder because there was a huge air pocket that the bleeder was not allowing out. It took me an hour or so all together for the plugs and valves, about a half hour or so for the CDV, and about 2 hours bleeding. LOL. The car has 65k miles on it.
I fix one thing and something is wears out. I noticed that my left inner tie rod end is starting to have some backlash when shaking the wheel. Its not that bad yet but oh well.
I fix one thing and something is wears out. I noticed that my left inner tie rod end is starting to have some backlash when shaking the wheel. Its not that bad yet but oh well.
#5
Originally Posted by 05545i' post='1077816' date='Dec 21 2009, 08:08 PM
I changed out my plugs on my 2005 545i today along with the pressure regulating valves, and the modified clutch delay valve. Its almost like driving a totally different car. It definitely picked up torque in the low end, and some on the top end as well. Engine seems to run much smoother. I'll keep all posted about fuel mileage. I also put in a modified CDV from Zeckhausen Racing and it really does give the clutch a MUCH better feel. However, its an absolute NIGHTMARE bleeding that system without a power bleeder. I had to remove the slave cylinder because there was a huge air pocket that the bleeder was not allowing out. It took me an hour or so all together for the plugs and valves, about a half hour or so for the CDV, and about 2 hours bleeding. LOL. The car has 65k miles on it.
I fix one thing and something is wears out. I noticed that my left inner tie rod end is starting to have some backlash when shaking the wheel. Its not that bad yet but oh well.
I fix one thing and something is wears out. I noticed that my left inner tie rod end is starting to have some backlash when shaking the wheel. Its not that bad yet but oh well.
#6
Members
Join Date: Nov 2008
Location: So. Utah
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 04 545i Sport Pkg, Cold Weather, Nav
Originally Posted by ericdiver' post='1077885' date='Dec 21 2009, 07:34 PM
pressure regulating valve??what is that, do u have a part number, it that the valves on the valve cover??.... i have 78k miles and thinking of a tune up......i took my cdv out just screwed the part straight in, and it was a bitch to bleed, i got most the air out and just quit cuz i was frustrated and to my surprise the next morning the air worked it self out and the pedal was hard and perfect.....
Check this thread out, very easy job. Pressure Regulating Valves
#7
Senior Members
Thread Starter
Join Date: Nov 2009
Location: Warwick, RI
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2005 545i Sport 6MT
Originally Posted by ericdiver' post='1077885' date='Dec 21 2009, 09:34 PM
pressure regulating valve??what is that, do u have a part number, it that the valves on the valve cover??.... i have 78k miles and thinking of a tune up......i took my cdv out just screwed the part straight in, and it was a bitch to bleed, i got most the air out and just quit cuz i was frustrated and to my surprise the next morning the air worked it self out and the pedal was hard and perfect.....
#8
yes that is like the ccv or whatever on the e39 540i in the back of the motor that was a major pita, but alot easier, i took the side covers off my motor so i am always looking at those things..... i think plugs and this part are due for me very soon, i have alittle bit of rough idle.... however i am still getting 28mpg on long trips so why mess with perfection
#9
Contributors
Join Date: Sep 2008
Location: Massachusetts, USA
Posts: 2,718
Likes: 0
Received 1 Like
on
1 Post
My Ride: 2006 525XI, Jet black on Dakota beige. Premium and winter packages. I consider myself a purist and intend to keep my car absolutely stock and shiny.
2008 328I Convertible, Sapphire black on beige interior. Premium package, NAV, iPod adapter.
Retired: 2002 325I, Titanium silver on black leather. Premium package. Absolutely stock and proud of it.
Originally Posted by 05545i' post='1077816' date='Dec 21 2009, 07:08 PM
I changed out my plugs on my 2005 545i today along with the pressure regulating valves, and the modified clutch delay valve. Its almost like driving a totally different car. It definitely picked up torque in the low end, and some on the top end as well. Engine seems to run much smoother. I'll keep all posted about fuel mileage. I also put in a modified CDV from Zeckhausen Racing and it really does give the clutch a MUCH better feel. However, its an absolute NIGHTMARE bleeding that system without a power bleeder. I had to remove the slave cylinder because there was a huge air pocket that the bleeder was not allowing out. It took me an hour or so all together for the plugs and valves, about a half hour or so for the CDV, and about 2 hours bleeding. LOL. The car has 65k miles on it.
I fix one thing and something is wears out. I noticed that my left inner tie rod end is starting to have some backlash when shaking the wheel. Its not that bad yet but oh well.
I fix one thing and something is wears out. I noticed that my left inner tie rod end is starting to have some backlash when shaking the wheel. Its not that bad yet but oh well.
#10
Senior Members
Thread Starter
Join Date: Nov 2009
Location: Warwick, RI
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2005 545i Sport 6MT
Originally Posted by porsche911targa' post='1077919' date='Dec 21 2009, 10:18 PM
Did the plugs look very dirty or could they have gone to 100K, in your opinion?
Somehow the car was still getting 25 MPG average, more on long trips with the original plugs. With the new plugs, it definitely feels like its picked up some power. Fuel mileage will have to wait...this tank does look like it could be best anyway, my foot has been a little heavy
Bottom line: Well worth the 45$ and the hour to put them in. I used Bosch IR Fusion Platinum plugs. OEM's were NGK.