Bentley owners, I need you to look on page...
01-13-2011, 05:28 PM
#1
Members
Thread Starter
Join Date: Dec 2010
Location: San Francisco/DFW
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2007 525i 6 spd ... [IMG]http://i970.photobucket.com/albums/ae188/shebuilt/e60/DriverSide1.jpg[/IMG]
Those of you with the Bentley manual and of course don't mind looking at wiring schematic I am in need of the wiring diagram for the passgenger seat sensor. I believe the 3 wires were brown, red, and white w/ x color stripe? Can you tell me from looking at manual where these might terminate and which one goes where?
Would appreciate it. Thanks!
Would appreciate it. Thanks!
01-14-2011, 01:51 PM
#5
Senior Members
Join Date: May 2009
Location: Westbury LI NY
Posts: 637
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 09 M5 (E60) Interlagos blue, Silverstone interior, with cold weather package. Adaptive Xenon headlamps and adaptive brake lights, hud, comfort access. Comfort seats, basically fully loaded.
haha board members are becoming harsh like the U.S economy.. 
01-16-2011, 07:29 AM
#9
Members
Thread Starter
Join Date: Dec 2010
Location: San Francisco/DFW
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2007 525i 6 spd ... [IMG]http://i970.photobucket.com/albums/ae188/shebuilt/e60/DriverSide1.jpg[/IMG]
Looks like I networked that server room! Gee guys, you e60 folks are brutal! I get all the love on my e38 forum. I am not keeping the car or I would dump funds on the Bentley. I guess no one is willing to help. Thanks anyway.
01-17-2011, 11:07 AM
#10
Senior Members
Join Date: Feb 2009
Location: Portland, Oregon, USA
Posts: 664
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2006 550i, 1984 Mercedes Gelandewagen
Very helpful replies folks.
Ironically, these three wires are not in the Bentley manual. I'm guessing it is because they are part of the saftey system and none of the electrical schematics for the safety/airbag system is in the Bentley manual.
WDS shows the wires used for the "Passenger?s seat occupancy detection." It's a three pin connector: The sensor part from the seat is: white (1), red (2), and Brown (3). The wiring harness side is white/red (1), purple/white (2), and Brown (3). Brown goes to ground. Red eventually goes to the B-pillar satellite controller. Purple goes to the Car access system. The red and purple wires go to the large 25 pin connector under the seat.
In the large 25 pin connector they are pins 17 (purple) and 18 (white/red).
The connector under the seat looks like this:
*CAUTION* since this is part of the safety system you should remove power to the cars electrical system before probing/modifying/fixing.
Those of you with the Bentley manual and of course don't mind looking at wiring schematic I am in need of the wiring diagram for the passgenger seat sensor. I believe the 3 wires were brown, red, and white w/ x color stripe? Can you tell me from looking at manual where these might terminate and which one goes where?
WDS shows the wires used for the "Passenger?s seat occupancy detection." It's a three pin connector: The sensor part from the seat is: white (1), red (2), and Brown (3). The wiring harness side is white/red (1), purple/white (2), and Brown (3). Brown goes to ground. Red eventually goes to the B-pillar satellite controller. Purple goes to the Car access system. The red and purple wires go to the large 25 pin connector under the seat.
In the large 25 pin connector they are pins 17 (purple) and 18 (white/red).
The connector under the seat looks like this:
*CAUTION* since this is part of the safety system you should remove power to the cars electrical system before probing/modifying/fixing.