Bent rim
#1
Thread Starter
Members
Joined: Nov 2010
Posts: 247
Likes: 0
From: New Jersey / Toronto
My Ride: Sapphire Black 07 530i non-sport
7000k Angel Eyes
6000k HID Xenon adaptive turn Head lamps and Fogs, Clear LED Turn Signals front/back and side markers. Clear bright license plate lamp. Full interior lighting upgrade.
Coding: daytime angel eyes, auto windows up, and digital speedometer. (Thanks to John at Motorcepts.com)
OEM Tinted LCI Tail lights (Thanks to David at http://www.luxmotorwerks.com
Oem Mtec rear bumper with diffuser and M5trunk finisher
Debadged! The best paint work! (Thanks to Desimone BMW)
20x8.5 +18 20x10 +25 Concept One RS-8 Black Machined Chrome Lip
V6.1 cables (Thanks to Bruce Miranda)
Nitto Invo tires 285x30 R20 - 245x35 R20
Discounttire.com
Vac Motorsports ecu chip upgrade, and fender roll
http://vacmotorsports.com/
wish list:
Rieger Front bumper
Hamann side skirts
Custom quad exhaust
Rpi Ram air intake scoop
M5 SMG shift knob
KW Variant 3 suspension
Brembo Big Brake kit
LCI Heads
Tints
BMW M5
Last Thursday I was coming out of NYC back home to South Jersey. I was driving granny style perfectly over or around every man hole, pot holes, and such. Each block was like an obstacle course I tell ya. I was almost clear and free. I make it to the Lincoln tunnel with no issues at all and get to the toll booths still no issues. I get my ticket and start picking up some speed, well then you know what happens. I hit a one at about 60mpg. and out of nowhere, It must've been the last freaking pothole before the road smoothed out. unbelievable! I know I hit it hard cause my knee shot up and hit my steering wheel pretty hard. I also freaked out and started to swerve.
so I go to the next service exit and check my wheel, I see no visual damage, but it was dark. so then I proceeded to drive 1.5 hours back home. I notices a suttle vibration at times, but I cant tell if it was already there or just in my head. For the most part it still drives smoothly.
The next morning I go for another look and and run my finger along the lip. I feel the an unevenness in the curvature of the lip. Oh man i flattened it out some bit. I'm not losing air because it happened last Thursday and im still fine.
Sucky part, i gotta drive about 500 miles tomorrow. Dunno if it'll hold up.
if you look closely to the top of the wheel, it looks slightly flattened.
sucks cause someone told me these RIMS cannot be fixed cause of the aluminum lip cover.
so I go to the next service exit and check my wheel, I see no visual damage, but it was dark. so then I proceeded to drive 1.5 hours back home. I notices a suttle vibration at times, but I cant tell if it was already there or just in my head. For the most part it still drives smoothly.
The next morning I go for another look and and run my finger along the lip. I feel the an unevenness in the curvature of the lip. Oh man i flattened it out some bit. I'm not losing air because it happened last Thursday and im still fine.
Sucky part, i gotta drive about 500 miles tomorrow. Dunno if it'll hold up.
if you look closely to the top of the wheel, it looks slightly flattened.
sucks cause someone told me these RIMS cannot be fixed cause of the aluminum lip cover.
#2
most times when a wheel gets bent, its the inner barrel of the rim that gets tweaked the worse.
have the tire shop throw the wheel on the balance machine. if its slightly bent, you may be alright with just rebalancing it. and you'll be able to see where the wheel is bent when it is being rotated on the machine.
otherwise you need to get a wheel repair specialist to bend it straight.
have the tire shop throw the wheel on the balance machine. if its slightly bent, you may be alright with just rebalancing it. and you'll be able to see where the wheel is bent when it is being rotated on the machine.
otherwise you need to get a wheel repair specialist to bend it straight.
Thread
Thread Starter
Forum
Replies
Last Post
Vman33
Complete Car Sales
5
03-14-2022 05:43 AM
bestofthebest
Complete Car Sales
4
03-28-2016 03:47 PM