5Series.net - Forums - High Beam Assist/FLA

5Series.net - Forums (https://5series.net/forums/)

- DIY: Do It Yourself (https://5series.net/forums/diy-do-yourself-14/)

- - High Beam Assist/FLA (https://5series.net/forums/diy-do-yourself-14/high-beam-assist-fla-112774/)

Quote:

Originally Posted by bobbyggx (Post 1550051)

I've done all of the above, I can see the FLA in INPA, I can diagnose it. The vin of the module is also changed. I've added $5AC and everything is coded accordingly. My KOMBI version is 9126642 lastly updated 09.11.2007. If I try to update it with DATE V50.2 it gives me the same number, thus I didn't proceed. The FLA sensor is working, the headlights are in auto mode, but the FLA is not working at all.

P.S. When I activate the FLA in the CAPPL and if I try to turn it ON it stays for 1-2 seconds ON and then automatically switches to OFF?

I have the exact same problem - well the FLA actually works - but no symbol in the KOMBI (and no software available) and when I turn on in CAPPL it turns off again by it self.

Did you ever find a solution?

Anyone with problems with fla sent me a pm and lets see what i can do for u....

Quote:

Originally Posted by pjfox23 (Post 1541642)

I bumped another thread relating to high beam assist. I am going to bump this one, too.

Here is what I have done to my 2008 M5:

Installed correct mirror. Wired to K_CAN_SL and K_CAN_SH.

Changed the vehicle order to include $5AC in both the LMA and CAS.

Coded CCC_APP trace and changed VA_LONGDISTANCELIGHT to aktive.

I can see "high beam assist" in I-drive. But, the actual on/off of the high beam is still not working. What am I missing? Do I need to code the Kombi or something else?

Hope someone can help, I seem to have hit a wall with this as my 2009 has CIC and I can't find CCC_APP?