Detailer's Domain: GT3RS with Swissvax
02-09-2009, 06:16 AM
#1
Former Vendor
Thread Starter
Join Date: Jan 2008
Location: NJ
Posts: 2,064
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2003 Audi RS6/2002 Porsche 911 Turbo/2007 Toyota FJ Cruiser
This was a very low mile car in a private collection. Pretty much in great shape needed a clean up/polish and some Swissvax treatment.
(sorry in advance for the bad pictures.)
Brief info on this beast Porsche 997 GT3 RS
The first, and highly anticipated, 911 is the upcoming GT3 RS -- which will make an appearance worldwide. The GT3 RS uses the wider rear fenders of the Carrera 4, a wider rear track, a more aggressive rear wing, and a modified front spoiler lip. The RS will be offered in the same 1970s colours that made the 1973 Carrera RS famous, as evidenced by the bright orange and green roll bars in test mules as well as the edges where their black peelcoats are shrinking. The new GT3 RS will lose weight compared to the standard 997 GT3 with items like a carbon-fiber wingtop, the extensive use of composite bodywork, and lightweight glass. It will homologate several changes for the upcoming 2007 GT3 RSR race car, possibly including a 3.8-liter flat six instead of the 3.6-liter, 415-hp unit in the new GT3.
Below are the tools and products used:
Einszett Perls Shampoo
Swissvax Paint Rubber (Yellow) and Optimum Instant Detail Spray and Gloss Enhancer for clay lube
Menzerna SIP
Menzerna PO85RD -
Menzerna Top Inspection
Swissvax Cleaner Fluid
Swissvax Crystal Rock
Wheels and Tires
Swissvax Pneu
P21S Wheel Cleaner Gel
Boar?s Hair Wheel Brush
Foam applicator pads
Swissvax Quick Finish
Swissvax Detail Brush
Swissvax Wheel Brush
Glass inside and out:
Lusso Glass Polish
Uber Glass MF Towels
Interior:
Leather Master Trio
Einszett Cockpit
Tools:
Infratech 5300
Makita 9227 Hi Speed Rotary
The Uber Foam Pads (5.5inch)
Tons of "Uber" Microfiber Towels
Uber Drying Towels
Cam Spray 1500A with Cam Spray Foam Gun
Infratech CM5300
Before exterior:
Before interior
(sorry in advance for the bad pictures.)
Brief info on this beast Porsche 997 GT3 RS
The first, and highly anticipated, 911 is the upcoming GT3 RS -- which will make an appearance worldwide. The GT3 RS uses the wider rear fenders of the Carrera 4, a wider rear track, a more aggressive rear wing, and a modified front spoiler lip. The RS will be offered in the same 1970s colours that made the 1973 Carrera RS famous, as evidenced by the bright orange and green roll bars in test mules as well as the edges where their black peelcoats are shrinking. The new GT3 RS will lose weight compared to the standard 997 GT3 with items like a carbon-fiber wingtop, the extensive use of composite bodywork, and lightweight glass. It will homologate several changes for the upcoming 2007 GT3 RSR race car, possibly including a 3.8-liter flat six instead of the 3.6-liter, 415-hp unit in the new GT3.
Below are the tools and products used:
Einszett Perls Shampoo
Swissvax Paint Rubber (Yellow) and Optimum Instant Detail Spray and Gloss Enhancer for clay lube
Menzerna SIP
Menzerna PO85RD -
Menzerna Top Inspection
Swissvax Cleaner Fluid
Swissvax Crystal Rock
Wheels and Tires
Swissvax Pneu
P21S Wheel Cleaner Gel
Boar?s Hair Wheel Brush
Foam applicator pads
Swissvax Quick Finish
Swissvax Detail Brush
Swissvax Wheel Brush
Glass inside and out:
Lusso Glass Polish
Uber Glass MF Towels
Interior:
Leather Master Trio
Einszett Cockpit
Tools:
Infratech 5300
Makita 9227 Hi Speed Rotary
The Uber Foam Pads (5.5inch)
Tons of "Uber" Microfiber Towels
Uber Drying Towels
Cam Spray 1500A with Cam Spray Foam Gun
Infratech CM5300
Before exterior:
Before interior
02-09-2009, 06:17 AM
#3
Former Vendor
Thread Starter
Join Date: Jan 2008
Location: NJ
Posts: 2,064
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2003 Audi RS6/2002 Porsche 911 Turbo/2007 Toyota FJ Cruiser
Claying:
So what do you do after you make a huge puddle in your detailing bay : )
You use one of these: (very cool machine)
And you clean up : ) so you have a nice dry work area again.
So what do you do after you make a huge puddle in your detailing bay : )
You use one of these: (very cool machine)
And you clean up : ) so you have a nice dry work area again.
02-09-2009, 06:27 AM
#7
Contributors
Join Date: Oct 2007
Location: Milky Way, Earth, N. America, CA, San Jose, 95136, Latitude N 37� 16.837, Longitude W 121� 50.461
Posts: 3,561
Likes: 0
Received 0 Likes
on
0 Posts
My Ride: 2004 530i | Sapphire Black | Sport | Premium | NAV | Logic 7 | DPE R07 Variant S Gloss Black with Polished Lip 20x8.5 front 20x10 rear | Falken FK452 tires 245/30/20 front 275/30/20 rear | H&R Coilovers | Smoked Tail Lights | M5 trunk spoiler | AC Schnitzer style roof spoiler | HID 8000K headlights & foglights | 35% tint all around | Sprint Booster | Speed Innovation ECU tuning | M5 trunk finisher | M-Tech body kit | Remus Quad Exhaust | AC Schnitzer style pedals | Euro Stickers | RPi Ram Air Induction | Smoked LED Side Lenses | AC Schnitzer style e-brake handle | AC Schnitzer style shifter | AC Schnitzer style iDrive knob | AC Schnitzer style carbon fiber diffuser | carbon fiber hood/trunk/steering emblems | carbon fiber grilles | carbon fiber door pillars | MTEC v2 Angel Eyes | Hamann style carbon fiber splitter
very nice work! 
