Inpa- after adaptations reset
01-01-2013, 09:07 AM
#1
New Members
Thread Starter
Join Date: Nov 2012
Posts: 7
Likes: 0
Received 0 Likes
on
0 Posts
Inpa- after adaptations reset
Hello everyone,
The car is BMW E60 M54B25, automatic transmission, late 2003 with 161000 km on the clock.
I recentlly had this "quack" noise from car's center (midlle), sometimes only. My car allways had idle @ 650 rpm slightlly rough. Today I made adaption reset to my car. I have to reset all moduls with INPA EDIABAS cable (I have blue one). Car is idleing now @ 800 rpm. slightlly rough also. I have uploaded photos of my screen capture at 5Series.net - Forums - rocky5's Album: INPA if anyone whants to check them to help me find any faults or something out of order. However, inpa did not give me any fault code. After reset I have started car with my cable out and in my i-drive i had instant error of YELLOW TRIANGLE with circle (arrow) telling me that DTC system has a fault "traction control". This yellow triangle with circle (arrow) is constantlly illuminated in my instrument cluster and DTC button does not function anymore. I can drive car normally. But when I touch brakes I can hear this quack. Sometimes it quacks even without me touching anything. I have performed all the process with engine shutdown and when engine was hot. After I took photos while engine on idle also hot.
I am sorry for my spelling\writeing errors.
Can anyone tell me what could be wrong?or any explanation, clue anything at all?
The car is BMW E60 M54B25, automatic transmission, late 2003 with 161000 km on the clock.
I recentlly had this "quack" noise from car's center (midlle), sometimes only. My car allways had idle @ 650 rpm slightlly rough. Today I made adaption reset to my car. I have to reset all moduls with INPA EDIABAS cable (I have blue one). Car is idleing now @ 800 rpm. slightlly rough also. I have uploaded photos of my screen capture at 5Series.net - Forums - rocky5's Album: INPA if anyone whants to check them to help me find any faults or something out of order. However, inpa did not give me any fault code. After reset I have started car with my cable out and in my i-drive i had instant error of YELLOW TRIANGLE with circle (arrow) telling me that DTC system has a fault "traction control". This yellow triangle with circle (arrow) is constantlly illuminated in my instrument cluster and DTC button does not function anymore. I can drive car normally. But when I touch brakes I can hear this quack. Sometimes it quacks even without me touching anything. I have performed all the process with engine shutdown and when engine was hot. After I took photos while engine on idle also hot.
I am sorry for my spelling\writeing errors.
Can anyone tell me what could be wrong?or any explanation, clue anything at all?
Thread
Thread Starter
Forum
Replies
Last Post
Vman33
Complete Car Sales
5
03-14-2022 04:43 AM
umnitza
Vendor Classifieds
1
11-03-2015 02:58 PM
